SCIM API

Gluu Server Community Edition supports the System for Cross-domain Identity Management (SCIM) version 2.0 out of the box.

To enable SCIM open the oxTrust administration interface and navigate to Organization Configuration > System Configuration. Find SCIM Support and select Enabled.

Then enable the protection mode you want for your API, see details here.

Swagger Documentation

Current Swagger documentation for Gluu SCIM APIs can be found in the SCIM API Swagger document

HTTP verbs

As a summary, these are the verbs a compliant SCIM server implementation (like Gluu) speaks:

HTTP Method	Description
GET	Retrieves one or more resources (e.g. Users/Groups)
POST	Creates new resources, executes searches, send bulk requests (batches)
PUT	Modifies resources by adding and replacing attributes only
DELETE	Deletes a resource
PATCH	Modifies a resource using a client-provided specific set of changes (additions, removals, and updates)

Resource types

The following resources are supported:

Resource	Schema URI	Notes
User	urn:ietf:params:scim:schemas:core:2.0:User	See section 4.1 of RFC 7643
Group	urn:ietf:params:scim:schemas:core:2.0:Group	See section 4.2 of RFC 7643
Fido u2f devices	urn:ietf:params:scim:schemas:core:2.0:FidoDevice	Represents a fido u2f credential enrolled by a user
Fido 2.0 devices	urn:ietf:params:scim:schemas:core:2.0:Fido2Device	Represents a fido 2.0 credential enrolled by a user

Additionally the following resource extensions are defined:

Resource	Schema URI	Attributes
User	urn:ietf:params:scim:schemas:extension:gluu:2.0:User	Attributes can be assigned dynamically via oxTrust

In this section we provide a conformance matrix where you can see which features from the spec are supported by Gluu implementation.

To learn about the specific capabilities of the service, inspect your /ServiceProvider, /ResourceTypes, and /Schemas endpoints (see below). These endpoints are not protected so you can use a web browser to check.

SCIM Endpoints

The following table summarizes the available endpoints in Gluu implementation of SCIM service

Endpoint	Resource	HTTP methods	Description
/Users	User	GET, POST, PUT, DELETE	Retrieve, add, modify and delete Users
/Groups	Group	GET, POST, PUT, DELETE	Retrieve, add, modify and delete Groups
/FidoDevices	Fido devices	GET, PUT, DELETE	Retrieve, modify and delete Fido devices
/Bulk		POST	Applies operations of different kind to a set of resources
/.search		POST	Search resources of all kind
/ServiceProvider		GET	Retrieve service provider configuration
/ResourceTypes		GET	Retrieve supported resource types
/Schemas		GET	Retrieve supported schemas info

Note

Actual endpoint URLs are prefixed accordingly with the root URL of SCIM API. As an example, the user's endpoint URL to use in your applications should be https://your.gluu-host.com/identity/restv1/scim/v2/Users or https://your.gluu-host.com/scim/restv1/scim/v2/Users if you are in a containers-based environment.

SCIM 2.0 is governed by the SCIM:Core Schema and SCIM:Protocol spec docs. The latter contains full details about the API structure, so use it as a reference in your development tasks.

Important notes:

• Unless otherwise stated, all endpoints are protected via UMA 2.0 or test mode.

• All payloads sent to endpoints using POST or PUT should be supplied using Content-Type: application/scim+json or application/json, and using UTF-8 encoding. Liwewise, output is sent from server in UTF-8.

Conformance matrix

The following table lists characteristics of SCIM protocol (see section 3 of RFC 7644) and correlates the level of support and conformance provided by Gluu Server implementation.

Characteristic	Compliance	Available via methods	Notes on support
Resource creation	Full	POST	Creation of Fido Devices not applicable
Resource retrieval by identifier	Full	GET
Resource(s) retrieval by query	Full	GET and POST	Supports searches from root endpoint too. Complex multi-valued attributes not supported in sortBy param
Resource attributes replacement	Partial	PUT	To avoid clients to accidentally clear data, only attributes found in payload are modified. No need to pass the whole resource nor required attributes
Resource attributes modification	Full	PATCH	All types of operations supported (add/remove/replace) for user and group resources
Resource removal	Full	DELETE
Bulk operations	Full	POST	Circular reference processing not supported. bulkIds can be used not only in "data" attribute of operations but in "path" too
Returned attributes control	Full	GET, POST, PUT, PATCH	Supports attributes/excludedAttributes params and attribute notation (sections 3.9/3.10)
"/me" URI alias	-	-	Not applicable: operations actually not executed on a user's behalf or other SCIM resource
Resource versioning	-	-	Feature may be available upon explicit customer demand

Attention

If you are using Couchbase as your DB for Gluu, please also review our list of SCIM Considerations when using CB.

/identity/restv1/scim/v2/Users

GET

Search users based on filter criteria (see section 3.4.2 of RFC 7644).

Query parameters

Name	Required	Data type
filter	no	string
startIndex	no	string
count	no	int
sortBy	no	string
sortOrder	no	string
attributes	no	string (comma-separated list)
excludedAttributes	no	string (comma-separated list)

Response

Output data is in form of a ListResponse. Resources returned belong to User.

Status code 200 is returned for a successful response.

POST

Creates a user (see section 3.3 of RFC 7644).

Parameters

Name	Required	Located in	Data type
attributes	no	url	string (comma-separated list)
excludedAttributes	no	url	string (comma-separated list)
	yes	body (payload)	Group

Response

The representation of the user created containing the attributes whose returnability is "default". This can be overriden by supplying attributes or excludedAttributes query parameters (see section 3.4.2.5 of RFC 7644).

Status code 201 is returned upon successful operation.

/identity/restv1/scim/v2/Users/.search

Search groups based on filter criteria (see section 3.4.3 of RFC 7644).

POST

Parameters

Name	Required	Data type
filter	no	string
startIndex	no	string
count	no	int
sortBy	no	string
sortOrder	no	string
attributes	no	string (comma-separated list)
excludedAttributes	no	string (comma-separated list)

Response

Output data is in form of a ListResponse. Resources returned belong to User.

Status code 200 is returned for a successful response.

/identity/restv1/scim/v2/Users/{id}

GET

Returns a user by id (see section 3.4.1 of RFC 7644).

Parameters

Name	Required	Located in	Data type
attributes	no	url	string (comma-separated list)
excludedAttributes	no	url	string (comma-separated list)

Response

The user requested containing the attributes whose returnability is "default". This can be overriden by supplying attributes or excludedAttributes query parameters (see section 3.4.2.5 of RFC 7644).

Status code 200 is returned upon successful operation. If the id supplied as part of the URL does not map to an existing user, then 404 is returned.

PUT

Updates a user (see section 3.5.1 of RFC 7644).

Parameters

Name	Required	Located in	Data type
attributes	no	url	string (comma-separated list)
excludedAttributes	no	url	string (comma-separated list)
	yes	body (payload)	User

For payload data, it's not necessary to provide the whole User representation. Partial data suffices, that is, a Json object that contains the attributes to be replaced in the destination.

Response

The representation of the user (after the update) containing the attributes whose returnability is "default". This can be overriden by supplying attributes or excludedAttributes query parameters (see section 3.4.2.5 of RFC 7644).

Status code 200 is returned upon successful operation. If the id supplied as part of the URL does not map to an existing user, then 404 is returned.

PATCH

Modifies a user (see section 3.5.2 of RFC 7644).

Parameters

Name	Required	Located in	Data type
attributes	no	url	string (comma-separated list)
excludedAttributes	no	url	string (comma-separated list)
	yes	body (payload)	PatchRequest

Response

The representation of the user (after modification) containing the attributes whose returnability is "default". This can be overriden by supplying attributes or excludedAttributes query parameters (see section 3.4.2.5 of RFC 7644).

Status code 200 is returned upon successful operation. If the id supplied as part of the URL does not map to an existing user, then 404 is returned.

DELETE

Deletes a user (see section 3.6 of RFC 7644).

Parameters

None

Response

A no content response (status code 204) if the operation was a successful. If the id supplied as part of the URL does not map to an existing user, then 404 is returned.

/identity/restv1/scim/v2/Groups

GET

Search groups based on filter criteria (see section 3.4.2 of RFC 7644).

Query parameters

Name	Required	Data type
filter	no	string
startIndex	no	string
count	no	int
sortBy	no	string
sortOrder	no	string
attributes	no	string (comma-separated list)
excludedAttributes	no	string (comma-separated list)

Response

Output data is in form of a ListResponse. Resources returned belong to Group.

Status code 200 is returned for a successful response.

POST

Creates a group (see section 3.3 of RFC 7644).

Parameters

Name	Required	Located in	Data type
attributes	no	url	string (comma-separated list)
excludedAttributes	no	url	string (comma-separated list)
	yes	body (payload)	Group

Response

The representation of the group created containing the attributes whose returnability is "default". This can be overriden by supplying attributes or excludedAttributes query parameters (see section 3.4.2.5 of RFC 7644).

Status code 201 is returned upon successful operation.

/identity/restv1/scim/v2/Groups/.search

Search groups based on filter criteria (see section 3.4.3 of RFC 7644).

POST

Parameters

Name	Required	Data type
filter	no	string
startIndex	no	string
count	no	int
sortBy	no	string
sortOrder	no	string
attributes	no	string (comma-separated list)
excludedAttributes	no	string (comma-separated list)

Response

Output data is in form of a ListResponse. Resources returned belong to Group.

Status code 200 is returned for a successful response.

/identity/restv1/scim/v2/Groups/{id}

GET

Returns a group by id (see section 3.4.1 of RFC 7644).

Parameters

Name	Required	Located in	Data type
attributes	no	url	string (comma-separated list)
excludedAttributes	no	url	string (comma-separated list)

Response

The group requested containing the attributes whose returnability is "default". This can be overriden by supplying attributes or excludedAttributes query parameters (see section 3.4.2.5 of RFC 7644).

Status code 200 is returned upon successful operation. If the id supplied as part of the URL does not map to an existing group, then 404 is returned.

PUT

Updates a group (see section 3.5.1 of RFC 7644).

Parameters

Name	Required	Located in	Data type
attributes	no	url	string (comma-separated list)
excludedAttributes	no	url	string (comma-separated list)
	yes	body (payload)	Group

For payload data, it's not necessary to provide the whole Group representation. Partial data suffices, that is, a Json object that contains the attributes to be replaced in the destination.

Response

The representation of the group (after the update) containing the attributes whose returnability is "default". This can be overriden by supplying attributes or excludedAttributes query parameters (see section 3.4.2.5 of RFC 7644).

Status code 200 is returned upon successful operation. If the id supplied as part of the URL does not map to an existing group, then 404 is returned.

PATCH

Modifies a group (see section 3.5.2 of RFC 7644).

Parameters

Name	Required	Located in	Data type
attributes	no	url	string (comma-separated list)
excludedAttributes	no	url	string (comma-separated list)
	yes	body (payload)	PatchRequest

Response

The representation of the group (after modification) containing the attributes whose returnability is "default". This can be overriden by supplying attributes or excludedAttributes query parameters (see section 3.4.2.5 of RFC 7644).

Status code 200 is returned upon successful operation. If the id supplied as part of the URL does not map to an existing group, then 404 is returned.

DELETE

Deletes a group (see section 3.6 of RFC 7644).

Parameters

None

Response

A no content response (status code 204) if the operation was a successful. If the id supplied as part of the URL does not map to an existing group, then 404 is returned.

/identity/restv1/scim/v2/FidoDevices

GET

Search fido devices based on filter criteria (see section 3.4.2 of RFC 7644).

Query parameters

Name	Required	Data type
filter	no	string
startIndex	no	string
count	no	int
sortBy	no	string
sortOrder	no	string
attributes	no	string (comma-separated list)
excludedAttributes	no	string (comma-separated list)

Response

Output data is in form of a ListResponse. Resources returned belong to FidoDevice.

Status code 200 is returned for a successful response.

/identity/restv1/scim/v2/FidoDevices/.search

Search FIDO devices based on filter criteria (see section 3.4.3 of RFC 7644).

POST

Parameters

Name	Required	Data type
filter	no	string
startIndex	no	string
count	no	int
sortBy	no	string
sortOrder	no	string
attributes	no	string (comma-separated list)
excludedAttributes	no	string (comma-separated list)

Response

Output data is in form of a ListResponse. Resources returned belong to FidoDevice.

Status code 200 is returned for a successful response.

/identity/restv1/scim/v2/FidoDevices/{id}

GET

Returns a fido u2f device by id (see section 3.4.1 of RFC 7644).

Parameters

Name	Required	Located in	Data type
attributes	no	url	string (comma-separated list)
excludedAttributes	no	url	string (comma-separated list)

Response

The FidoDevice requested containing the attributes whose returnability is "default". This can be overriden by supplying attributes or excludedAttributes query parameters (see section 3.4.2.5 of RFC 7644).

Status code 200 is returned upon successful operation. If the id supplied as part of the URL does not map to an existing fido u2f device, then 404 is returned.

PUT

Updates a fido u2f device (see section 3.5.1 of RFC 7644).

Parameters

Name	Required	Located in	Data type
attributes	no	url	string (comma-separated list)
excludedAttributes	no	url	string (comma-separated list)
	yes	body (payload)	FidoDevice

For payload data, it's not necessary to provide the whole FidoDevice representation. Partial data suffices, that is, a Json object that contains the attributes to be replaced in the destination.

Take into account the mutability of attributes for this resource (check the /Schemas endpoint). For security reasons only a few attributes are allowed to be modified.

Response

The representation of the FidoDevice (after the update) containing the attributes whose returnability is "default". This can be overriden by supplying attributes or excludedAttributes query parameters (see section 3.4.2.5 of RFC 7644).

Status code 200 is returned upon successful operation. If the id supplied as part of the URL does not map to an existing fido u2f device, then 404 is returned.

DELETE

Deletes a fido u2f device (see section 3.6 of RFC 7644).

Parameters

None

Response

A no content response (status code 204) if the operation was a successful. If the id supplied as part of the URL does not map to an existing fido u2f device, then 404 is returned.

/identity/restv1/scim/v2/Fido2Devices

GET

Search fido 2.0 devices based on filter criteria (see section 3.4.2 of RFC 7644).

Query parameters

Name	Required	Data type
filter	no	string
startIndex	no	string
count	no	int
sortBy	no	string
sortOrder	no	string
attributes	no	string (comma-separated list)
excludedAttributes	no	string (comma-separated list)

Response

Output data is in form of a ListResponse. Resources returned belong to Fido2Device.

Status code 200 is returned for a successful response.

/identity/restv1/scim/v2/Fido2Devices/.search

Search fido 2.0 devices based on filter criteria (see section 3.4.3 of RFC 7644).

POST

Parameters

Name	Required	Data type
filter	no	string
startIndex	no	string
count	no	int
sortBy	no	string
sortOrder	no	string
attributes	no	string (comma-separated list)
excludedAttributes	no	string (comma-separated list)

Response

Output data is in form of a ListResponse. Resources returned belong to Fido2Device.

Status code 200 is returned for a successful response.

/identity/restv1/scim/v2/Fido2Devices/{id}

GET

Returns a fido 2.0 device by id (see section 3.4.1 of RFC 7644).

Parameters

Name	Required	Located in	Data type
attributes	no	url	string (comma-separated list)
excludedAttributes	no	url	string (comma-separated list)

Response

The Fido2Device requested containing the attributes whose returnability is "default". This can be overriden by supplying attributes or excludedAttributes query parameters (see section 3.4.2.5 of RFC 7644).

Status code 200 is returned upon successful operation. If the id supplied as part of the URL does not map to an existing fido 2 device, then 404 is returned.

PUT

Updates a fido 2 device (see section 3.5.1 of RFC 7644).

Parameters

Name	Required	Located in	Data type
attributes	no	url	string (comma-separated list)
excludedAttributes	no	url	string (comma-separated list)
	yes	body (payload)	Fido2Device

For payload data, it's not necessary to provide the whole Fido2Device representation. Partial data suffices, that is, a Json object that contains the attributes to be replaced in the destination.

Take into account the mutability of attributes for this resource (check the /Schemas endpoint). For security reasons only a few attributes are allowed to be modified.

Response

The representation of the Fido2Device (after the update) containing the attributes whose returnability is "default". This can be overriden by supplying attributes or excludedAttributes query parameters (see section 3.4.2.5 of RFC 7644).

Status code 200 is returned upon successful operation. If the id supplied as part of the URL does not map to an existing fido 2 device, then 404 is returned.

DELETE

Deletes a fido 2 device (see section 3.6 of RFC 7644).

Parameters

None

Response

A no content response (status code 204) if the operation was a successful. If the id supplied as part of the URL does not map to an existing fido 2 device, then 404 is returned.

/identity/restv1/scim/v2/Bulk

Applies bulk operations (see section 3.7 of RFC 7644).

POST

Parameters

Name	Located in	Required	Data type
	body (payload)	yes	BulkRequest

Response

A BulkResponse with details of every attempted operation. The shape and size of the response depends heavily on the value of "failOnErrors" found in BulkRequest (see spec).

Status code 200 is returned upon successful operation. Every operation result in BulkResponse contains at the same time its own status code.

/identity/restv1/scim/v2/.search

Search resources based on filter criteria (see section 3.4.3 of RFC 7644).

POST

Parameters

Name	Required	Data type
filter	no	string
startIndex	no	string
count	no	int
sortBy	no	string
sortOrder	no	string
attributes	no	string (comma-separated list)
excludedAttributes	no	string (comma-separated list)

Response

Output data is in form of a ListResponse. Resources returned belong to Resource.

Status code 200 is returned for a successful response.

Service Provider Configuration Endpoints

There are three endpoints that facilitate discovery of features of the service itself and about the schema used; in other words, service metadata. Please check section 4 of RFC 7644 for more information.

/identity/restv1/scim/v2/ServiceProvider

Security

This endpoint is not protected

GET

Parameters

None (no query params).

Response

Information about the capabilities of the server in Json format as decribed in section 5 of RFC 7643.

Status code 200 is returned for a successful response.

/identity/restv1/scim/v2/ResourceTypes

Security

This endpoint is not protected

GET

Parameters

None (no query params).

Response

Information about the types of resources available in the service (e.g., Users and Groups) in form of a ListResponse.

It's possible to request the information for a single resource type by adding a resource name suffix to the URL, for instance /ResourceTypes/User for users. In this case, a json is returned according to section 6 of RFC 7643.

Status code 200 is returned for a successful response.

/identity/restv1/scim/v2/Schemas

Security

This endpoint is not protected

GET

Parameters

None (no query params).

Response

Retrieves the schemas in use by available resources (and which are accepted by the service provider).

Output data is in form of a ListResponse, however it's possible to request the information for a single resource type by adding a schema URI suffix to the URL, for instance /Schemas/urn:ietf:params:scim:schemas:core:2.0:Group for schema info about groups. In this case, a json is returned according to section 7 of RFC 7643.

Status code 200 is returned for a successful response.

Definitions

This section summarizes data model definitions useful to understand what values to supply when interacting with the different endpoints of the API. For more detailed information please:

• See SCIM:Core Schema
• Inspect the contents of the /Schemas endpoint. Use a browser for this (none of the service provider configuration endpoints are protected).

General

Meta

name	type	required
created	string (date-time)	no
lastModified	string (date-time)	no
location	string	no
resourceType	string	no

ListResponse

name	type	required
schemas	array[string]	yes
totalResults	integer	no
startIndex	integer	no
itemsPerPage	integer	no
resources	array[Resource]	yes

Resource

name	type	required
schemas	array[string]	required
id	string	no
externalId	string	no
meta	Meta	no

Bulks

BulkRequest

name	type	required
schemas	array[string]	yes
failOnErrors	integer	no
operations	array[BulkOperation]	yes

BulkResponse

name	type	required
schemas	array[string]	yes
operations	array[BulkOperation]	yes

BulkOperation

name	type	required
bulkId	string	no
method	string	yes
path	string	no
location	string	no
data	object	no
status	string	no
response	object	no

Patches

PatchRequest

name	type	required
schemas	array[string]	yes
Operations	array[PatchOperation]	yes

PatchOperation

name	type	required
op	string	yes
path	string	no
value	Object	no

Users-related

User

name	type	required
schemas	array[string]	yes
meta	Meta	no
id	string	no
externalId	string	no
userName	string	no
name	Name	no
displayName	string	no
nickName	string	no
profileUrl	string	no
title	string	no
userType	string	no
preferredLanguage	string	no
locale	string	no
timezone	string	no
active	boolean	no
password	string	no
emails	array[Email]	no
phoneNumbers	array[PhoneNumber]	no
ims	array[Im]	no
photos	array[Photo]	no
addresses	array[Address]	no
entitlements	array[Entitlement]	no
roles	array[Role]	no
x509Certificates	array[X509Certificate]	no
groups	array[GroupRef]	no

Name

name	type	required
formatted	string	no
familyName	string	no
givenName	string	no
middleName	string	no
honorificPrefix	string	no
honorificSuffix	string	no

Address

name	type	required
primary	boolean	no
formatted	string	no
streetAddress	string	no
locality	string	no
region	string	no
postalCode	string	no
country	string	no
type	string	no

Email

name	type	required
value	string	yes
display	string	no
primary	boolean	no
type	string	no

PhoneNumber

name	type	required
value	string	yes
display	string	no
primary	boolean	no
type	string	no

Entitlement

name	type	required
value	string	yes
display	string	no
primary	boolean	no
type	string	no

Photo

name	type	required
value	string	yes
display	string	no
primary	boolean	no
type	string	no

Role

name	type	required
value	string	yes
display	string	no
primary	boolean	no
type	string	no

Im

name	type	required
value	string	yes
display	string	no
primary	boolean	no
type	string	no

X509Certificate

name	type	required
value	string	yes
display	string	no
primary	boolean	no
type	string	no

GroupRef

name	type	required
value	string	yes
display	string	no
type	string	no
$ref	string	no

Groups-related

Group

schemas	array[string]	yes
meta	Meta	no
id	string	no
externalId	string	no
name	type	required
displayName	string	no
members	array[MemberRef]	no

MemberRef

name	type	required
value	string	yes
display	string	no
type	string	no
$ref	string	no

Fido u2f devices-related

FidoDevice

name	type	required
schemas	array[string]	yes
meta	Meta	no
id	string	no
userId	string	no
creationDate	string (date-time)	no
application	string	no
counter	string	no
deviceData	string	no
deviceHashCode	string	no
deviceKeyHandle	string	no
deviceRegistrationConf	string	no
lastAccessTime	string (date-time)	no
status	string	no
displayName	string	no
description	string	no
nickname	string	no

Fido 2.0 devices-related

Fido2Device

name	type	required
schemas	array[string]	yes
meta	Meta	no
id	string	no
userId	string	no
creationDate	string (date-time)	no
counter	integer	no
status	string	no
displayName	string	no