Skip to content

Preparing VM for Gluu Server Installation#


Thank you for your interest in the Gluu Server! Below are instructions for preparing your VM for a standard Gluu Server deployment. Once your server is ready, move on to the installation instructions.

System Requirements#

The Gluu Server needs to be deployed on a server or VM with the following minimum requirements.

CPU Unit RAM Disk Space Processor Type
2 4GB 40GB 64 Bit

If you plan on installing more than the default components (i.e. oxAuth, oxTrust, and LDAP), we recommend using a machine with at least 8GB of RAM.

Gluu requires a static IP Address that resolves to a computer hostname, which can be achieved by adding an entry to the DNS server, or in /etc/hosts.


Want to try our newly released "Docker Edition"? Head over to the docker edition docs

Supported Operating Systems#

Deploy Gluu on a server or VM with one of the following supported operating systems:

  • Ubuntu 14.04, 16.04
  • CentOS 6.x, 7.x
  • RHEL 6.x, 7.x
  • Debian 8


The following ports need to be open to the Internet by default.

Port Number Protocol Notes
80 tcp Forwards to 443
443 tcp apache2/httpd
22 tcp ssh


See the operations guide for a list of internal ports used by Gluu Server components (e.g. oxAuth, oxTrust, etc.).

File Descriptors(FD)#

The Gluu Server requires setting the file descriptors to 65k. Follow these steps or research how to do this on your Linux platform.

  • Add the following lines in the /etc/security/limits.conf file.
* soft nofile 65536
* hard nofile 262144
  • Add the following lines to /etc/pam.d/login if not already present.

    session required

  • Increase the FD limit to 65535. The system file limit is set in /proc/sys/fs/file-max.

It is recommended to check the FD limit before increasing it, and if this limit is customized and more than default, we recommend using the higher one. The FD limit can be found using the below command.

# cat /proc/sys/fs/file-max
Please note, the command may vary depending on the OS flavor used.

echo 65535 > /proc/sys/fs/file-max**
* Use the ulimit command to set the FD limit to the hard limit specified in /etc/security/limits.conf.

ulimit -n unlimited


Centos by default will not accept more than the default maximum of 65535. You may get an error while performing the above command. If you do get an error, set it to ulimit -n 262144, or 65535 if you get a second error.

  • Restart your system.

Cloud-specific notes#

Amazon AWS#

Amazon AWS instances provide a public and private IP address. While running the /install/community-edition-setup/ script, use the Private IP address. Also, use a hostname other than the long default hostname that Amazon provides as CN(Canonical Name). Update your DNS or hosts file accordingly.

Google Cloud Platform#

Gluu Server installation in GCP is pretty straight forward. We need to check a couple of points for this installation:

  • Deployer must select supported operating system and required resources.
  • Enable 'HTTPS' from 'Firewall'
  • Do not enter any IP during the installation of Gluu Server, the setup script will automatically gather appropriate IP information.
  • When accessing the newly installed Gluu server from a browser, update the DNS or hosts file accordingly.

A video tutorial is also available in the Gluu channel

Microsoft Azure#

Accessing the Gluu Server on Azure can be a little tricky because of the Public/Private IP. Azure assigns new Public/Private IP addresses each time the server is started.

Follow these steps to set up the VM on Azure:

  1. Log into Windows Azure Administrative Panel

  2. Navigate to Virtual Machines > Create a Virtual Machine

  3. From the menu, choose Compute > Virtual Machine > From Gallery branch.

  4. Choose Ubuntu Server 14.04 LTS or CentOS 6.7. Remember to set selinux to permissive if you choose CentOS.

  5. Provide a name for the VM in the Virtual Machine Name field and use Standard for Tier.

  6. Select a server with at least 4GB RAM in the Size dropdown menu.

  7. Provide a username/password to connect via SSH and upload an SSH certificate. Click Next.

  8. Create a new cloud service and select None for the Availability Set option. * Endpoints Section: This is where port forwarding is set so that the internal IP address can be selectively reachable from the outside world. By default, only tcp /22 is there for SSH. The public ports for http and https (tcp ports 80 and 443) have to be added and mapped to the same private ports. If the cloud mappings are flagged as conflicting, proceed without setting them. Remember to set them after the creation of the VM. Then, click Next.

  9. Choose not to install VM Agent and click the tick button to finalize the VM.

  10. Go to the Dashboard tab of VM Management Panel and copy the DNS Name. This is the name that is used to access the Gluu Server.

  11. SSH to the server and proceed with the installation.

Linode VM#

Linode Virtual Machines (VM) use a custom kernel which is not supported by the Gluu Server, therefore the kernel must be updated before the Gluu Server can be installed in a Linode VM. The following steps will guide you through kernel update in the Linode VM.

  • Check for the current version of the kernel. If the output contains -Linode, then proceed

    # uname -a

  • Run the following command to update the kernel:

    # apt-get install linux-image-virtual grub2

  • Modify grub file in the /etc/default/ folder:

    # vim /etc/default/grub

  • Ensure that the following lines are present in the grub file

    GRUB_SERIAL_COMMAND="serial --speed=19200 --unit=0 --word=8 --parity=no --stop=1"

  • Finally run the following commands to update grub and reboot:

    # update-grub
    # reboot