VM (only recommended for development/testing)

#title: "Install Gluu Flex Openbanking in VM" tags: [gluu, flex, openbanking, vm, rhel9, ubuntu24, janssen, deployment] status: active

This page combines the installation guides for RHEL 9 and Ubuntu 24.04 LTS. Select your operating system below and follow its section.

Contents

1. RHEL 9
2. Ubuntu 24.04

#1. RHEL 9

#Purpose and support boundary

This runbook installs a single-node Gluu Open Banking/Janssen environment on a clean RHEL 9 x86_64 VM. It combines the official VM workflow with fixes proven during a complete RHEL 9.8 installation, Admin UI integration, browser test, mTLS regression test, and reboot test.

Run privileged command blocks from a root shell, or prefix individual commands with sudo. Read-only client validation commands can run as an unprivileged user that can read the designated test CA and client credentials.

The Open Banking VM distribution is intended for development and testing. Prefer the cloud-native distribution and production-grade PKI, DNS, backup, monitoring, and change control for production.

Authoritative references:

• Official Gluu Open Banking VM guide
• Official Gluu Flex RHEL guide
• Current Janssen installer wrapper
• RHEL 9 execution plan (internal verification record)
• Verified RHEL 9.8 installation work log (internal verification record)

Important: the current public installer and private Open Banking overlay can move independently. Pin both sources, hash every input, and validate their compatibility before changing the server. Do not copy the example deployment's commits or hashes blindly into a new installation.

#1. Collect deployment values

Record these values before connecting to the VM. Keep passwords, SSA JWTs, private keys, client assertions, and bearer tokens out of chat, shell arguments, and shared logs.

Set the real values in the root shell before running examples; do not paste angle-bracket placeholders literally.

Also decide:

• public DNS or a documented client-side hosts entry;
• local MySQL or an approved remote MySQL topology (the tested profile used local MySQL);
• generated Jans signing keys or approved external keys/JWKS;
• certificate subject and server trust policy;
• whether Admin UI is required and licensed;
• whether full SSA dynamic client registration is in scope;
• how the administrator password, SSA, Directory keys, transport PKCS#12, and truststore will be delivered securely.

#2. Preflight the clean VM

Minimum resources are 2 CPUs, 4 GB RAM, 2 GB persistent swap, and 50 GB disk. A more comfortable tested allocation is 4 CPUs, 8 GB or more RAM, and 4096 MB application memory.

Run the read-only checks first:

cat /etc/redhat-release
cat /etc/os-release
uname -m
hostnamectl
nproc
free -h
swapon --show
lsblk
df -hT /
ip -brief address
timedatectl
ss -lntup
getenforce
firewall-cmd --state || true
dnf repolist --enabled
dnf list --available mysql-server mod_auth_openidc
rpm -qa | grep -Ei 'jans|gluu|flex|httpd|apache|mysql|mariadb|postgres|java|jetty' || true
find /opt/jans /etc/jans /etc/certs -maxdepth 2 -print 2>/dev/null
systemctl --failed

Continue only when all of these are true:

• RHEL 9 x86_64 is installed and package repositories are reachable.
• The minimum resources are available.
• Time synchronization is active.
• The chosen hostname resolves to the VM's interface address locally.
• TCP 80 and 443 are free, or existing listeners have an approved disposition.
• The cloud firewall/security group allows SSH from the operator and HTTPS from test clients.
• No Jans, Gluu, Flex, database, certificate, or configuration data needs preservation.
• Outbound HTTPS works with normal certificate verification.

Stop if an existing installation is found. This guide is not an in-place upgrade procedure.

#Add persistent swap when required

First confirm /swapfile does not exist and no conflicting swap policy is present. Then:

cp -a /etc/fstab /etc/fstab.pre-openbanking
fallocate -l 2G /swapfile
chmod 0600 /swapfile
mkswap /swapfile
swapon /swapfile
echo '/swapfile none swap sw 0 0' >> /etc/fstab
systemctl daemon-reload
findmnt --verify --verbose
swapon --show
free -h

#3. Establish hostname and client routing

Set the intended FQDN and confirm it resolves to the address assigned to the VM interface:

hostnamectl set-hostname FQDN.example.org
hostname -f
getent hosts FQDN.example.org
ip -brief address

When public DNS intentionally does not point at the test VM, add a hosts entry on every test client:

PUBLIC_OR_REACHABLE_IP FQDN.example.org

Record this limitation. External tests must reach the intended VM, not whichever host public DNS currently identifies.

#4. Prepare RHEL 9

#SELinux

The tested official RHEL path uses permissive mode. Back up the configuration, set permissive mode, and verify it. Do not disable SELinux.

cp -a /etc/selinux/config /etc/selinux/config.pre-openbanking
setenforce 0
sed -ri 's/^SELINUX=.*/SELINUX=permissive/' /etc/selinux/config
getenforce
grep '^SELINUX=' /etc/selinux/config

#Firewall and RPM dependencies

Preserve remote access by configuring SSH and HTTPS before relying on the new firewall state:

dnf install -y firewalld httpd mod_ssl mod_auth_openidc
firewall-offline-cmd --zone=public --add-service=ssh
firewall-offline-cmd --zone=public --add-service=https
systemctl enable --now firewalld
firewall-cmd --zone=public --list-services

Open a second SSH session before closing the first one. Confirm the correct interface is assigned to the intended firewalld zone. Install EPEL only if the enabled RHEL repositories cannot supply mod_auth_openidc.

Use a normal installer umask, normally 022:

umask
umask 022

A restrictive inherited umask can make runtime files unreadable to the jetty or web-server accounts.

#5. Freeze and validate installer inputs

#Where to obtain the software

The VM installer is public, but the Open Banking profile overlay is not a public standalone RPM or anonymous download. Obtain each input as follows:

The official Open Banking VM guide documents this convenience entry point:

curl --fail --location --output install.py \
  https://raw.githubusercontent.com/JanssenProject/jans/main/jans-linux-setup/jans_setup/install.py
sudo python3 install.py --profile openbanking

Do not use this form for anything beyond a disposable, throwaway exploration VM. It fetches install.py from the mutable main branch and executes it as root with no commit pin and no digest or signature check, so the code that runs is whatever main currently contains at fetch time. Use the pinned, staged method below for any VM whose result you intend to keep or rely on.

That wrapper downloads Jans setup and its selected component artifacts. For the Open Banking profile it also requests a GitHub access token so it can retrieve the private overlay. Do not put a token in the URL, shell history, a logged command-line argument, or this guide. The tested wrapper reads its interactive token prompt visibly, so use it only from a private console; the reproducible staged method below is preferred.

For a pinned deployment, obtain the public files at the approved Jans tag or commit:

JANS_REF='<approved-jans-tag-or-full-commit>'

curl --fail --location --output /secure/source/install.py \
  "https://raw.githubusercontent.com/JanssenProject/jans/${JANS_REF}/jans-linux-setup/jans_setup/install.py"
curl --fail --location --output /secure/source/jans.zip \
  "https://github.com/JanssenProject/jans/archive/${JANS_REF}.zip"

After access to the private Open Banking repository has been approved, use an authenticated Git credential helper to create the overlay archive without placing credentials in the command:

OB_REF='<approved-openbanking-tag-or-full-commit>'

git clone https://github.com/GluuFederation/openbanking.git /secure/source/openbanking
git -C /secure/source/openbanking checkout --detach "$OB_REF"
git -C /secure/source/openbanking archive \
  --format=zip --output=/secure/source/openbanking.zip "$OB_REF"

If repository access is not available, stop and request the approved openbanking.zip plus its tag/commit, checksum, and provenance from the Gluu delivery/support owner. Do not substitute an arbitrary attachment or an unverified archive.

Obtain and freeze these inputs before continuing:

• the official install.py wrapper;
• a Jans source archive pinned to JANS_REF;
• the private Open Banking archive pinned to OB_REF;
• every RPM/WAR/JAR or other component artifact selected by the underlying Jans setup;
• a compatible, reviewed overlay if the pinned sources need the corrections described below.
• the pinned Flex/Admin UI source and binary bundle when Admin UI is in scope;
• the Flex SSA in a separate root-owned 0600 file.

Create protected staging and evidence directories:

install -d -m 0700 /opt/dist/jans
install -d -m 0700 /root/openbanking-evidence-YYYYMMDDTHHMMSSZ/inputs
install -m 0700 /secure/source/install.py /opt/dist/jans/install.py
install -m 0600 /secure/source/jans.zip /opt/dist/jans/jans.zip
install -m 0600 /secure/source/openbanking.zip /opt/dist/jans/openbanking.zip
sha256sum /opt/dist/jans/install.py /opt/dist/jans/jans.zip /opt/dist/jans/openbanking.zip
unzip -t /opt/dist/jans/jans.zip
unzip -t /opt/dist/jans/openbanking.zip

Compare this output against the trusted digests already recorded for this JANS_REF/OB_REF pair (from the delivery/support owner for openbanking.zip, or from a second independent fetch of the pinned commit for install.py/jans.zip). Do not proceed if any digest does not match; a mismatch means the file is not the pinned, reviewed input. Only after digests match, copy the checksum output into the protected evidence directory as the retained proof of what was verified. unzip -t checks integrity only; it does not prove extraction is safe. Explicitly scan ZIP members and reject absolute paths, .. traversal, symlink entries, and embedded private keys. Legitimate setup archives may contain executable scripts. The Open Banking ZIP must contain the expected jans-linux-setup/openbanking subtree.

The three files shown above are only the wrapper and source/profile inputs. They are not a complete offline installation bundle. Before invoking -use-downloaded, first stage every RPM, WAR, JAR, and other component artifact selected by the underlying Jans setup into this same directory (via a pinned download-only run of install.py, or an approved pre-built artifact bundle), build an inventory of what was staged, and hash-verify every file against trusted digests. -use-downloaded is valid only once that complete, hash-verified bundle is present; otherwise use the online installation path in step 7.

#Mandatory compatibility review

Before installation, extract copies into a temporary staging directory and confirm:

1. RHEL 9 maps to the installer's RPM path (red 9).
2. The Open Banking HTTPD template is named templates/apache/https_jans.conf.mako; the current setup renders the Mako template, not the legacy https_jans.conf file.
3. The template renders without an undefined jans_fido2_port when FIDO2 is not selected.
4. Public discovery and JWKS are proxied, while /jans-auth/restv1/token, /jans-auth/restv1/register, and /jans-auth/restv1/revoke retain SSLVerifyClient require.
5. The RFC 7009 revocation path is present externally, not only on the Jans Auth loopback listener.
6. Registration.py uses the available HttpService2 API, for example through an intentionally reviewed compatibility import, rather than the removed HttpService class.
7. No unused test private key is shipped into the live setup tree.
8. Every referenced class exists in the pinned Jans artifacts.

Render-test the template and run httpd -t against generated configuration before accepting a compatibility overlay. Build one final corrected overlay containing the complete reviewed change set; preserve the immutable original and intermediate archives instead of overwriting them. Install the core platform with that final hashed overlay before proceeding to Admin UI. In the verified build, that was openbanking.v5.zip; its hash is version-specific.

#6. Prepare installation answers safely

The setup properties collect the interface IP, FQDN, certificate subject, support email, application memory, persistence choice, signing-key choice, and administrator password. Keep the root-owned 0600 properties file outside /opt/jans/jans-setup, because the wrapper replaces that setup tree.

• Use the static address shown by ip -brief address, not a public NAT address absent from the VM.
• Select MySQL for the tested Open Banking profile.
• Use only an approved staticKid. If Jans generates signing keys, verify the chosen key exists; leaving staticKid empty is safer than referencing a nonexistent key.
• Keep the password in a root-owned 0600 file or enter it at a non-echoing prompt. Do not put it in command arguments or shell history.
• Keep SSA and private-key material root-owned and 0600. Do not decode or print the SSA into logs.
• Print and retain only a sanitized, non-secret answer summary.

Create /root/openbanking-setup.properties under umask 077, then confirm root:root ownership and mode 0600. Keep the administrator password out of the visible command line and append it only from a protected input or non-echoing prompt.

#7. Install the Open Banking profile

The official online entry point is:

sudo python3 install.py --profile openbanking

For a controlled deployment, prefer a frozen or targeted bundle containing only the selected components. A pinned download-only workflow may be used if that installer version supports targeted selection, but avoid an unfiltered nightly download-all run: it may fetch unselected components and fail on unrelated missing artifacts. Preserve its logs, inventory every selected artifact, hash them, and resolve any relevant failure before installation.

Only after the complete selected bundle is present should the downloaded-input path be used:

cd /opt/dist/jans
sudo python3 ./install.py -use-downloaded -yes --profile openbanking \
  --args="-f /root/openbanking-setup.properties --no-progress"

The wrapper extracts Jans setup, applies the Open Banking overlay, passes --use-downloaded to the underlying setup, and invokes it. Keep the full wrapper and underlying setup logs root-only.

In the verified RHEL 9.8 run, the download-only phase stopped on an unselected Shibboleth nightly artifact. The selected Auth and Config API artifacts were independently verified, and the underlying setup was then run directly. Treat that as a documented incident recovery, not as the normal installation path.

Do not trust the wrapper's exit code by itself: its child invocation can fail without making the wrapper fail. Installation passes only when the underlying setup log contains:

Janssen Server installation successful!

and the expected files, services, and endpoints pass the next section. On the first real exception, stop. Do not blindly rerun after a partial database import.

#8. Validate the core installation

Start with service, listener, and permission checks:

systemctl --failed
systemctl status httpd mysqld jans-auth jans-config-api firewalld --no-pager
systemctl is-enabled httpd mysqld jans-auth jans-config-api firewalld
httpd -t
ss -lntup

Verify that jetty can traverse parent directories and read its environment files, startup files, WAR/JAR/XML files, database configuration, and keystores. Fix only the narrow ownership or mode error; never make the entire tree world-readable or writable.

Then test, through the external hostname:

The following examples reproduce the public, non-secret checks. Set ROUTE_IP to the address reached by the client and use the trusted local or public CA file; do not expose client keys in command history.

FQDN=FQDN.example.org
ROUTE_IP=192.0.2.10
CA_CERT=/secure/path/test-ca.crt

curl --fail --silent --show-error \
  --resolve "${FQDN}:443:${ROUTE_IP}" --cacert "${CA_CERT}" \
  "https://${FQDN}/.well-known/openid-configuration"

curl --fail --silent --show-error \
  --resolve "${FQDN}:443:${ROUTE_IP}" --cacert "${CA_CERT}" \
  "https://${FQDN}/jans-auth/restv1/jwks"

curl --fail --silent --show-error \
  --resolve "${FQDN}:443:${ROUTE_IP}" --cacert "${CA_CERT}" \
  "https://${FQDN}/jans-config-api/api/v1/health"

# Expected to fail at the TLS/client-certificate boundary.
curl --verbose --resolve "${FQDN}:443:${ROUTE_IP}" --cacert "${CA_CERT}" \
  -X POST "https://${FQDN}/jans-auth/restv1/token"
curl --verbose --resolve "${FQDN}:443:${ROUTE_IP}" --cacert "${CA_CERT}" \
  -X POST "https://${FQDN}/jans-auth/restv1/register"
curl --verbose --resolve "${FQDN}:443:${ROUTE_IP}" --cacert "${CA_CERT}" \
  -X POST "https://${FQDN}/jans-auth/restv1/revoke"

Use approved, secret-safe validators for the credential-bearing sequence. On the verified server they are staged in the protected evidence area as validate_platform_state.py, validate_core_openbanking.py, and validate_adminui_browser_no_client_cert.py. Review and parameterize them before use.

Trust the test CA explicitly where possible. If a test temporarily uses curl -k, record that server-certificate verification was bypassed; this does not test server identity and must never be confused with client mTLS enforcement.

A public-CA certificate is not required for this test topology. Regenerate a locally issued server certificate containing the FQDN in subjectAltName, distribute the local test CA through a secure channel, and configure clients to trust it. The defect in the verified host is the CN-only certificate, not the absence of a public CA.

#9. Install Admin UI as a separate licensed phase

The Open Banking profile does not install Admin UI. If it is required:

Keep the order exact: install core with the final hashed Open Banking overlay, validate core, install the pinned Flex/Admin UI build, then run the build-specific Admin UI compatibility helper and repeat all validation.

1. Select a Flex/Admin UI build compatible with the pinned Jans commit.

2. Record its version, source commit, signature/checksum, and dependencies.

3. Back up the live Jans setup, database configuration, /etc/httpd/conf.d/https_jans.conf, and generated frontend files.

4. Store the Flex SSA as a root-owned 0600 file. Do not pass it to flex_setup.py; that installer has no SSA/license argument.

5. Run the compatible Flex installer from its staged directory. The tested command was:

   install -d -m 0700 "$EVIDENCE_DIR/admin-ui/logs"
   cd /opt/jans/jans-setup/flex/flex-linux-setup
   python3 ./flex_setup.py --install-admin-ui --flex-non-interactive \
     --adminui_authentication_mode agama_org.gluu.agama.pw.main \
     > "$EVIDENCE_DIR/admin-ui/logs/flex-admin-ui-install-console.log" 2>&1
   adminui_setup_status=$?
   printf '%s\n' "$adminui_setup_status" \
     > "$EVIDENCE_DIR/admin-ui/logs/flex-admin-ui-install-exit-status"

   Copy

6. Inspect both /opt/jans/jans-setup/logs/flex-setup.log and /opt/jans/jans-setup/logs/flex-setup-error.log; do not trust the exit status alone.

7. Retrieve and activate the license afterward through the Admin UI license API, reading the SSA from its protected file. Keep request/response bodies root-only because they contain license material.

8. Confirm the /admin/ route, web and backend clients, scopes, role/permission mappings, update-token script, and Config API plugin.

9. Only after the Admin UI asset exists, run the reviewed apply-adminui-openbanking-compat-v1.py helper. It must assert the expected old/new frontend patterns and exact build hash or stop. The final overlay does not by itself preserve every runtime mutation.

#Required Open Banking/Admin UI integration checks

• Verify staticKid names an existing RS256 signing key. When generated keys are used, clear a stale value in the live jansAppConf JSON, saved /opt/jans/jans-setup/output/jans-auth/jans-auth-config.json, and retained setup-properties copies; then restart only jans-auth.
• Admin UI backend JWT Authorization headers can exceed 8 KiB. Back up /etc/httpd/conf.d/https_jans.conf, its setup template, and /opt/jans/jetty/jans-config-api/start.d/server.ini. Place LimitRequestFieldSize 16384 inside the HTTPS virtual host and set jetty.httpConfig.requestHeaderSize=16384 in server.ini. Run httpd -t, reload HTTPD, restart only jans-config-api, and verify an authorized request larger than 8 KiB reaches Config API.
• Preserve the Admin UI-facing /jans-config-api/api/v1/stat API. Externally proxy /jans-auth/restv1/internal/stat to http://localhost:8081/jans-auth/restv1/internal/stat; Jans Auth still enforces bearer authorization.
• Ensure the installed /admin/env-config.js is web-readable (0644 in the tested deployment); it contains public endpoint configuration, not secrets. Patch the staged Flex installer so reinstall preserves this mode.
• Preserve discovery metadata needed by the frontend: userinfo_endpoint, end_session_endpoint, revocation_endpoint, and introspection_endpoint. Update both live database configuration and saved setup output, then restart jans-auth.
• If the role-based update-token script must be installed or enabled, back up its jansCustomScr row first.

#Prevent the post-login Redirecting... loop

A browser public client performing authorization-code + PKCE has no client TLS certificate. It will receive HTTP 403 if its code exchange uses an HTTPD location with unconditional SSLVerifyClient require.

Use a narrowly scoped, reviewed adapter design:

• Keep the original Open Banking /jans-auth/restv1/token, /jans-auth/restv1/register, and /jans-auth/restv1/revoke routes mTLS-only.
• Add dedicated Admin UI adapter paths without Apache client-certificate enforcement: /jans-auth/restv1/admin-ui-token proxies only to http://localhost:8081/jans-auth/restv1/token, and /jans-auth/restv1/admin-ui-revoke proxies only to http://localhost:8081/jans-auth/restv1/revoke.
• Configure only the Admin UI OIDC frontend to use those adapter paths for PKCE exchange and logout: the installer's generated Admin UI configuration and the pinned templates/auiConfiguration.json both set auiBackendApiClient.tokenEndpoint; override that value from /jans-auth/restv1/token to /jans-auth/restv1/admin-ui-token in both places (injecting the Config API URL into /admin/env-config.js alone does not change this endpoint). Apply the equivalent override for revoke.
• Prefer a reviewed source build. If an installed minified asset must be patched, require a timestamped backup plus exact file hash and unique occurrence checks; the generated asset filename is build-specific, so never edit it blindly.
• Do not remove or relax SSLVerifyClient require on the original Open Banking routes.

Because this changes a security boundary, require explicit approval, back up every affected file, validate httpd -t, and rerun both the browser and Open Banking mTLS test suites. Both adapter URLs are publicly reachable without a client certificate; Jans authorization-code, PKCE, client-credential, token, and grant validation becomes the security boundary there. Compromised credentials for another client could potentially use an adapter to bypass Apache's original mTLS boundary. The original Open Banking URLs remain protected by Apache mTLS.

#10. Full acceptance test

The installation is complete only after all of the following pass before and after a reboot:

• zero failed systemd units;
• httpd, mysqld, jans-auth, jans-config-api, and firewalld active and enabled;
• persistent 2 GiB swap and SELinux permissive state;
• valid HTTPD syntax and expected listeners;
• discovery, public JWKS, and Config API health;
• real browser /admin/ load, login, dashboard, harmless authorized backend read, logout, and session deletion;
• fresh-cookie, no-client-certificate Admin UI PKCE exchange, ID-token validation, UserInfo, backend token, and revocation;
• original Open Banking token/register/revoke rejection without a client certificate;
• mTLS sequence: token 200 -> scoped Config API read 200 -> revoke 200 -> token reuse 401;
• no private keys, passwords, full tokens, client assertions, or SSA content in shared evidence.

Reboot gate:

reboot

After reconnecting, repeat the service, discovery, JWKS, health, browser, no-certificate, and complete mTLS checks. A pre-reboot pass alone is insufficient.

Run the protected server-side validators after core installation, after Admin UI integration, and again after reboot:

cd "$EVIDENCE_DIR/admin-ui/stage"
python3 validate_platform_state.py
python3 validate_core_openbanking.py
python3 validate_adminui_browser_no_client_cert.py

The core validator must explicitly report token/read/revoke/reuse as 200/200/200/401 and confirm that all three original token/register/revoke endpoints reject clients without a certificate.

#11. Known issue: SSA dynamic client registration

Do not claim end-to-end Open Banking registration is complete merely because the registration script initializes.

The verified RHEL 9.8 deployment remains blocked for SSA DCR until all of these are available and corrected:

• the matching Open Banking Directory signing key;
• transport PKCS#12 and its securely delivered password;
• the matching truststore;
• an approved TPP mTLS certificate;
• the missing ScopeService import in Registration.py;
• removal of logging that exposes token responses or complete client-assertion POST data.

After those items are supplied securely, rerun script-load checks and exercise the complete registration path while monitoring sanitized Jans Auth logs.

#12. Troubleshooting map

#13. Evidence, handoff, and rollback

Keep a root-only evidence directory containing:

• OS and preflight output;
• source commits, download URLs, signatures, and SHA-256 values;
• sanitized installation answers;
• original and corrected overlay manifests;
• configuration backups and a change log;
• setup logs, service states, endpoint summaries, and test result codes;
• pre- and post-reboot validation;
• remaining limitations and untested flows.

Take a VM/provider snapshot immediately before the first mutation. Before each correction, back up the live file, its template or saved-output copy, and affected database rows. On httpd -t failure, restore both the live and template copies before any reload. After a partial database import, preserve logs and state; do not rerun or uninstall until the first causal error is understood.

The Jans uninstall operation removes product data and is destructive:

python3 /opt/jans/jans-setup/install.py -uninstall

Run it only with explicit approval and after preserving required evidence and data. Restore backed-up firewall, SELinux, hosts, and HTTPD configuration only when doing so will not strand the operator.

#Appendix A: verified test-host artifacts

These values document one successful RHEL 9.8 nightly installation. They are audit references, not automatically approved inputs for another server.

The verified host used a client hosts entry for 54.213.215.176 testobrhel9.gluu.info; public DNS did not point at it. Its generated server certificate was CN-only without a SAN. Rotate the administrator password during handoff because it appeared in collaboration history; the password itself is intentionally absent from this guide.

Back to contents

#2. Ubuntu 24.04

This guide installs Gluu Flex Open Banking on Ubuntu 24.04 LTS using the command-line installer that ships with the distribution. The process requires no prior configuration outside of standard VM, networking, and DNS preparation. It covers certificates, software installation, Admin UI integration, and a comprehensive post-installation acceptance checklist.

#Installation at a glance

Steps in this guide installs the following software components.

• Ubuntu 24.04 LTS
• Apache 2.4
• MySQL 8
• Amazon Corretto Java 17
• Jetty 12
• Jans Auth
• Jans Config API
• Jans CLI/TUI
• Jans FIDO2
• Open Banking scripts and profiles
• Gluu Flex Admin UI and its Config API plugin
• A local 2 GB swap file

At a high-level, following steps are involved in installation of Gluu Flex Open Banking on Ubuntu VM.

1. Create an Ubuntu 24.04 VM and static DNS record.
2. Open 443 and restrict SSH.
3. Obtain the Flex SSA and production certificates, or create test certificates.
4. Run the version-pinned Jans installer with the Open Banking profile.
5. Confirm Jans Auth, Config API, Apache, and MySQL are healthy.
6. Install the matching Flex package and Admin UI.
7. Install the SAN-enabled HTTPS certificate and mTLS CA in Apache.
8. Import the issuing CA into Java's trust store.
9. Validate OIDC discovery and the Admin UI backend introspection route.
10. Import the test client certificate into the browser.
11. Activate Flex with the SSA and sign in to /admin/.
12. Complete the acceptance checklist and take an off-host backup.

#Prerequisites

#Hardware recommendation

Prepare a fresh Ubuntu 24.04 LTS x86-64 VM with following hardware configuration:

#Networking recommendations

Followig are the recommendations for network connectivity from the VM:

• One stable public IP address
• Working outbound HTTPS access
• Inbound TCP 443 from intended clients
• Inbound TCP 22 restricted to administrator IP addresses
• TCP 80 only if needed for certificate issuance or redirecting to HTTPS
• Do not expose ports 8074, 8081, or 3306 publicly.

#DNS Setup

Create an A record before installation:

id.example.org  ->  203.0.113.10

Confirm it from a machine outside the VM:

dig +short id.example.org A

The result must be the VM's stable public IP. The hostname must not change after installation.

#Flex license and SSA

Obtain a Software Statement Assertion (SSA) for the Flex license and save it as a text file in a protected location. The Admin UI will request it during initial activation. Treat the SSA as sensitive.

#Open Banking keys and certificates

For production, obtain the certificates required by the applicable Open Banking trust framework. For a private QA environment, this guide shows how to create a private test CA, server certificate, and client certificate.

Never use the same subject or Common Name for the CA, server, and client certificates. A safe pattern is:

#Prepare Ubuntu

Log in using an administrative account and define values for this deployment:

FQDN=id.example.org
PUBLIC_IP=203.0.113.10
JANS_VERSION=2.3.0
FLEX_VERSION=6.3.0
OPENBANKING_PROFILE_VERSION=6.3.0-1
COSIGN_VERSION=3.1.2
COSIGN_DEB_SHA256=f458f6bd2f3d11ac803ec0dba31c836a82364bcd3a5a09e2aa6adef57a0f7d1b
CERT_DIR=/etc/certs/ob

Update the host and install basic tools:

sudo apt update
sudo apt -y full-upgrade
sudo apt install -y curl wget jq unzip ca-certificates openssl chrony
sudo systemctl enable --now chrony

If the upgrade installs a new kernel, reboot now and reconnect before continuing.

Set the hostname:

sudo hostnamectl set-hostname "$FQDN"
hostnamectl

Make sure /etc/hosts contains the private interface address and FQDN. Do not map the FQDN only to 127.0.0.1.

If the VM has less than 2 GB swap, create a swap file:

sudo fallocate -l 2G /swapfile
sudo chmod 600 /swapfile
sudo mkswap /swapfile
sudo swapon /swapfile
echo '/swapfile none swap sw 0 0' | sudo tee -a /etc/fstab
free -h

Configure the firewall:

sudo ufw allow 443/tcp
sudo ufw allow from YOUR_ADMIN_IP to any port 22 proto tcp
sudo ufw enable
sudo ufw status verbose

Replace YOUR_ADMIN_IP before enabling UFW. Keep the current SSH session open until a second SSH login succeeds.

Open TCP port 80 only if the selected certificate issuer needs an HTTP challenge or Apache will redirect HTTP to HTTPS:

sudo ufw allow 80/tcp

Otherwise, omit that rule and leave TCP port 80 closed.

#Install Sigstore

The Jans and Flex release packages are signed with Sigstore. Install the pinned cosign package before downloading either product package:

cd /tmp
wget "https://github.com/sigstore/cosign/releases/download/v${COSIGN_VERSION}/cosign_${COSIGN_VERSION}_amd64.deb"

echo "${COSIGN_DEB_SHA256}  cosign_${COSIGN_VERSION}_amd64.deb" \
  | sha256sum --check

sudo apt install -y "/tmp/cosign_${COSIGN_VERSION}_amd64.deb"
cosign version

The checksum is the SHA-256 digest published for the v3.1.2 GitHub release asset. Do not continue unless sha256sum reports OK and cosign version reports v3.1.2. When updating COSIGN_VERSION, obtain the new digest independently from the official Sigstore release page and update both values together.

#Install Janssen Open Banking

Flex 6.3.0 corresponds to Janssen 2.3.0. Always confirm the compatible versions on the release pages before using newer versions.

The official Open Banking VM workflow runs Jans setup with --profile openbanking. Install the versioned, signed release package instead of downloading a Python installer from a mutable source branch:

cd /tmp
wget "https://github.com/JanssenProject/jans/releases/download/v${JANS_VERSION}/jans_${JANS_VERSION}-stable.ubuntu24.04_amd64.deb"
wget "https://github.com/JanssenProject/jans/releases/download/v${JANS_VERSION}/jans-ubuntu24-${JANS_VERSION}-stable.bundle"

cosign verify-blob \
  --bundle "jans-ubuntu24-${JANS_VERSION}-stable.bundle" \
  --certificate-identity-regexp 'https://github.com/JanssenProject/jans' \
  --certificate-oidc-issuer 'https://token.actions.githubusercontent.com' \
  "jans_${JANS_VERSION}-stable.ubuntu24.04_amd64.deb"

sudo apt install -y "/tmp/jans_${JANS_VERSION}-stable.ubuntu24.04_amd64.deb"
sudo python3 /opt/jans/jans-setup/install.py \
  --profile openbanking \
  --setup-branch "v${JANS_VERSION}" \
  --openbanking-setup-branch "v${OPENBANKING_PROFILE_VERSION}"

Do not install the package unless cosign reports Verified OK. This verification binds the installer to the Janssen release workflow rather than merely calculating a checksum for an untrusted download. The setup command also pins both source overlays to release tags that match Flex 6.3.0. The Open Banking profile is in a private Gluu repository, so the installer prompts for an authorized GitHub token; enter it only at the prompt, never as a command-line argument or shell-history entry.

The profile asks for:

• VM IP and FQDN
• Certificate subject information
• Maximum application memory
• MySQL persistence
• An Open Banking static kid
• Whether an external Open Banking signing key will be used
• Confirmation before it writes the configuration

If you supply an external private key, copy it to a root-only directory and set mode 600 before setup. Never paste the private key or its password into a ticket, chat, or shared log.

Enter values appropriate to your environment for the following inputs:

Let setup finish completely and the Java service start. First startup may take several minutes.

Logs can be monitored at:

/opt/jans/jans-setup/logs/setup.log

#Verify the base installation

Before adding Flex Admin UI, confirm that the base services are healthy:

sudo systemctl is-active apache2 mysql jans-auth jans-config-api
curl -fsS "https://${FQDN}/.well-known/openid-configuration" \
  --cacert /path/to/current/issuing-ca.crt | jq '.issuer, .token_endpoint, .jwks_uri'

If the generated HTTPS certificate is only temporary, complete Section 8 before expecting browser validation to succeed. Do not continue to Admin UI while Jans Auth or Config API is inactive.

#Install Gluu Flex and Admin UI

Download and verify the stable Flex package:

cd /tmp
wget "https://github.com/GluuFederation/flex/releases/download/v${FLEX_VERSION}/flex_${FLEX_VERSION}-stable.ubuntu24.04_amd64.deb"
wget "https://github.com/GluuFederation/flex/releases/download/v${FLEX_VERSION}/flex-ubuntu24-${FLEX_VERSION}-stable.bundle"

cosign verify-blob \
  --bundle "flex-ubuntu24-${FLEX_VERSION}-stable.bundle" \
  --certificate-identity-regexp 'https://github.com/GluuFederation/flex' \
  --certificate-oidc-issuer 'https://token.actions.githubusercontent.com' \
  "flex_${FLEX_VERSION}-stable.ubuntu24.04_amd64.deb"

sudo apt install -y "/tmp/flex_${FLEX_VERSION}-stable.ubuntu24.04_amd64.deb"

Run Flex setup:

sudo python3 /opt/jans/jans-setup/flex/flex-linux-setup/flex_setup.py

Answer y to Install Admin UI. Install Casa only if it is part of the design.

The Flex setup log is:

/opt/jans/jans-setup/logs/flex-setup.log

Flex setup installs the Admin UI static application, Admin UI Config API plugin, OIDC clients, scopes and role mappings, the default Cedarling policy store, and the Agama password flow used by the UI.

#Configure certificates

Skip test-certificate generation if you have real certificates.

#Create a private test CA

sudo install -d -m 750 "$CERT_DIR"
cd /tmp

openssl req -x509 -newkey rsa:3072 -sha256 -nodes -days 3650 \
  -keyout ob-test-ca.key \
  -out ob-test-ca.crt \
  -subj '/C=US/O=Example Test/CN=Flex OB Test Root CA'

sudo install -o root -g root -m 600 ob-test-ca.key "$CERT_DIR/ca.key"
sudo install -o root -g root -m 644 ob-test-ca.crt "$CERT_DIR/ca.crt"

Keep the CA private key offline if possible. It is needed only to issue or revoke test certificates.

#Create the HTTPS server certificate with SAN

The Subject Alternative Name is mandatory for modern browsers. A correct Common Name alone is insufficient.

cd /tmp
openssl genrsa -out server.key 3072
openssl req -new -key server.key -out server.csr \
  -subj "/C=US/O=Example Test/OU=Server/CN=${FQDN}"

tee server.ext >/dev/null <<EOF
basicConstraints=critical,CA:FALSE
keyUsage=critical,digitalSignature,keyEncipherment
extendedKeyUsage=serverAuth
subjectAltName=DNS:${FQDN},IP:${PUBLIC_IP}
EOF

sudo openssl x509 -req -in server.csr \
  -CA "$CERT_DIR/ca.crt" -CAkey "$CERT_DIR/ca.key" -CAcreateserial \
  -out server.crt -days 825 -sha256 -extfile server.ext

sudo install -o root -g root -m 600 server.key "$CERT_DIR/server.key"
sudo install -o root -g root -m 644 server.crt "$CERT_DIR/server.crt"

Validate it before touching Apache:

openssl verify -CAfile "$CERT_DIR/ca.crt" "$CERT_DIR/server.crt"
openssl x509 -in "$CERT_DIR/server.crt" -noout -subject -issuer -dates -ext subjectAltName
openssl verify -CAfile "$CERT_DIR/ca.crt" -verify_hostname "$FQDN" "$CERT_DIR/server.crt"

All three commands must succeed, and the SAN must contain the FQDN.

#Create a test mTLS client certificate

cd /tmp
openssl genrsa -out client.key 3072
openssl req -new -key client.key -out client.csr \
  -subj '/C=US/O=Example Test/OU=Open Banking Client/CN=ob-test-client-01'

tee client.ext >/dev/null <<'EOF'
basicConstraints=critical,CA:FALSE
keyUsage=critical,digitalSignature,keyEncipherment
extendedKeyUsage=clientAuth
EOF

sudo openssl x509 -req -in client.csr \
  -CA "$CERT_DIR/ca.crt" -CAkey "$CERT_DIR/ca.key" -CAcreateserial \
  -out client.crt -days 365 -sha256 -extfile client.ext

openssl verify -CAfile "$CERT_DIR/ca.crt" client.crt
openssl pkcs12 -export \
  -inkey client.key -in client.crt -certfile "$CERT_DIR/ca.crt" \
  -name 'Flex OB test client' -out client.p12

Give client.p12 a strong export password. Import it into the test browser or operating-system certificate store. Delete unprotected temporary private-key copies after securely transferring the bundle.

#Configure Apache mTLS

Back up the vhost:

sudo a2enmod ssl headers proxy proxy_http
sudo cp -a /etc/apache2/sites-enabled/https_jans.conf \
  "/etc/apache2/sites-enabled/https_jans.conf.before-ob-mtls"

Ensure the HTTPS virtual host contains:

SSLEngine on
SSLProtocol -all +TLSv1.2
SSLCertificateFile /etc/certs/ob/server.crt
SSLCertificateKeyFile /etc/certs/ob/server.key
SSLCACertificateFile /etc/certs/ob/ca.crt

# Ask for a client certificate at the TLS layer, but allow ordinary UI pages.
SSLVerifyClient optional
SSLVerifyDepth 10

<Location /jans-auth/restv1/register>
    SSLVerifyClient require
    SSLOptions -StdEnvVars +ExportCertData
    RequestHeader set X-ClientCert "%{SSL_CLIENT_CERT}s"
    ProxyPass http://127.0.0.1:8081/jans-auth/restv1/register
    ProxyPassReverse http://127.0.0.1:8081/jans-auth/restv1/register
</Location>

<Location /jans-auth/restv1/token>
    SSLVerifyClient require
    SSLOptions -StdEnvVars +ExportCertData
    RequestHeader set X-ClientCert "%{SSL_CLIENT_CERT}s"
    ProxyPass http://127.0.0.1:8081/jans-auth/restv1/token
    ProxyPassReverse http://127.0.0.1:8081/jans-auth/restv1/token
</Location>

Keep the proxy routes generated by the installer; do not replace the whole file with this fragment. Ensure Apache's ssl, headers, proxy, and proxy_http modules are enabled. RequestHeader set overwrites any client-supplied X-ClientCert value with the certificate that Apache validated during the TLS handshake.

The repaired reference profile explicitly allowed TLS 1.2. Enable TLS 1.3 only when the selected Open Banking profile, Flex/Jans release, and interoperability test suite support it.

Validate and reload:

sudo apache2ctl configtest
sudo systemctl reload apache2
sudo systemctl is-active apache2

If the Admin UI performs its token exchange directly from the browser against an mTLS-required token endpoint, that browser must present a valid client certificate. A production design may instead use a dedicated mTLS alias or backend-mediated exchange; align this with the relevant Open Banking profile.

#Trust the issuing CA in Java

Jans Auth and Config API use the Java trust store when calling HTTPS endpoints. Import the issuing CA, not the server leaf certificate. Importing a leaf certificate creates a fragile pin that breaks whenever the server certificate is renewed.

Back up the trust store:

sudo cp -a /opt/jre/lib/security/cacerts \
  "/opt/jre/lib/security/cacerts.before-ob-ca"

Replace any stale alias and import the CA:

sudo /opt/jre/bin/keytool -delete \
  -alias flex_ob_test_ca \
  -keystore /opt/jre/lib/security/cacerts \
  -storepass changeit 2>/dev/null || true

sudo /opt/jre/bin/keytool -importcert -noprompt -trustcacerts \
  -alias flex_ob_test_ca \
  -file "$CERT_DIR/ca.crt" \
  -keystore /opt/jre/lib/security/cacerts \
  -storepass changeit

sudo /opt/jre/bin/keytool -list \
  -alias flex_ob_test_ca \
  -keystore /opt/jre/lib/security/cacerts \
  -storepass changeit

Compare the listed SHA-256 fingerprint with:

openssl x509 -in "$CERT_DIR/ca.crt" -noout -fingerprint -sha256

Restart the Java services:

sudo systemctl restart jans-auth jans-config-api

#Admin UI configuration checks

#Use loopback for the backend's own introspection call

On a single-node VM, the Admin UI backend can introspect its token through the local Jans Auth listener. This avoids sending an internal call back through public Apache mTLS and prevents a certificate trust loop.

First inspect the current Admin UI configuration. Do not print the entire record because it contains client secrets.

sudo mysql -N jansdb -e "
SELECT JSON_UNQUOTE(JSON_EXTRACT(jansConfApp,
'$.oidcConfig.auiBackendApiClient.introspectionEndpoint'))
FROM jansAppConf WHERE doc_id='admin-ui';"

For the single-node topology, the expected value is:

http://127.0.0.1:8081/jans-auth/restv1/introspection

If it is still the public HTTPS URL and adminui.log reports a PKIX error, back up and update only this field:

sudo mysqldump jansdb jansAppConf --where="doc_id='admin-ui'" \
  | sudo tee /root/admin-ui-config-before-introspection.sql >/dev/null

sudo mysql jansdb <<'SQL'
UPDATE jansAppConf
SET jansConfApp = JSON_SET(
  jansConfApp,
  '$.oidcConfig.auiBackendApiClient.introspectionEndpoint',
  'http://127.0.0.1:8081/jans-auth/restv1/introspection'
)
WHERE doc_id = 'admin-ui';
SQL

sudo systemctl restart jans-config-api

If /opt/jans/jans-setup/flex/auiConfiguration.json exists, make the same targeted change there so rerunning setup does not restore the old value. Back up that file first and keep it mode 600, because it contains secrets.

#Ensure discovery advertises userinfo_endpoint

Check discovery without displaying sensitive data:

curl -fsS "https://${FQDN}/.well-known/openid-configuration" \
  --cacert "$CERT_DIR/ca.crt" \
  | jq '{issuer,authorization_endpoint,token_endpoint,userinfo_endpoint,introspection_endpoint,jwks_uri}'

Every displayed field must be a non-null URL. If userinfo_endpoint is absent, the Admin UI may finish the authorization callback and then request /jans-config-api/, which returns 404.

For affected nightly builds only, back up and add the discovery key:

sudo mysqldump jansdb jansAppConf --where="doc_id='jans-auth'" \
  | sudo tee /root/jans-auth-config-before-userinfo.sql >/dev/null

sudo mysql jansdb <<'SQL'
UPDATE jansAppConf
SET jansConfDyn = JSON_SET(
  jansConfDyn,
  '$.discoveryAllowedKeys',
  JSON_ARRAY_APPEND(
    JSON_EXTRACT(jansConfDyn, '$.discoveryAllowedKeys'),
    '$',
    'userinfo_endpoint'
  )
)
WHERE doc_id = 'jans-auth'
  AND NOT JSON_CONTAINS(
    JSON_EXTRACT(jansConfDyn, '$.discoveryAllowedKeys'),
    JSON_QUOTE('userinfo_endpoint')
  );
SQL

sudo systemctl restart jans-auth

Also update the installer-generated source configuration under /opt/jans/jans-setup/output/jans-auth/ if it is present, after backing it up. This workaround should not be applied blindly to a newer stable release.

#Start and verify the system

Enable and restart the core services:

sudo systemctl enable apache2 mysql jans-auth jans-config-api
sudo systemctl restart mysql jans-auth jans-config-api apache2
sudo systemctl is-active apache2 mysql jans-auth jans-config-api

Every result must be active.

Confirm private listeners:

sudo ss -lntp | grep -E ':(443|8074|8081|3306)\b'

Expected topology:

• Apache listens publicly on 443.
• Jans Config API listens on 127.0.0.1:8074.
• Jans Auth listens on 127.0.0.1:8081.
• MySQL listens on 127.0.0.1:3306.

Check the public endpoints:

curl -fsSI "https://${FQDN}/admin/" --cacert "$CERT_DIR/ca.crt"
curl -fsS "https://${FQDN}/.well-known/openid-configuration" \
  --cacert "$CERT_DIR/ca.crt" | jq -e '.issuer and .token_endpoint and .userinfo_endpoint'
curl -fsS "https://${FQDN}/jans-auth/restv1/jwks" \
  --cacert "$CERT_DIR/ca.crt" | jq -e '.keys | length > 0'

Check that both protected endpoints require mTLS. Requests without a client certificate should fail at TLS or return an authorization error; they must not reach a successful registration or token response:

curl -v "https://${FQDN}/jans-auth/restv1/register" \
  --cacert "$CERT_DIR/ca.crt"
curl -v "https://${FQDN}/jans-auth/restv1/token" \
  --cacert "$CERT_DIR/ca.crt"

Then test both routes with the client certificate:

curl -v "https://${FQDN}/jans-auth/restv1/register" \
  --cacert "$CERT_DIR/ca.crt" \
  --cert /path/to/client.crt \
  --key /path/to/client.key
curl -v "https://${FQDN}/jans-auth/restv1/token" \
  --cacert "$CERT_DIR/ca.crt" \
  --cert /path/to/client.crt \
  --key /path/to/client.key

An OAuth or registration error caused by the deliberately incomplete request is acceptable for this connectivity test. The important result is that TLS accepts the client certificate and both requests reach Jans Auth. Confirm in the Jans Auth log that the forwarded certificate was parsed; do not log or publish the certificate itself.

#Activate and access Admin UI

1. Import the test CA into the browser's trust store if the HTTPS certificate is privately issued.
2. Import client.p12 into the browser or operating-system client certificate store.
3. Open https://id.example.org/admin/.
4. Select the mTLS certificate when the browser asks.
5. Upload or paste the SSA only in the Flex activation screen.
6. Sign in as admin with the administrator password set during Jans setup.
7. Confirm that the page displays the dashboard and the administrator identity.

The installer creates a default policy store with an admin role and assigns that role to the default administrator.

#Troubleshooting Admin UI

#Fast diagnostic commands

sudo systemctl --no-pager --full status apache2 jans-auth jans-config-api mysql
sudo journalctl -u jans-auth -u jans-config-api --since '15 minutes ago' --no-pager
sudo tail -n 200 /var/log/apache2/error.log
sudo tail -n 200 /var/log/apache2/access.log
sudo tail -n 200 /var/log/adminui/adminui.log

Do not post raw logs publicly until access tokens, client secrets, authorization codes, cookies, SSAs, email addresses, and certificate subjects have been redacted.

#Symptom matrix

#Certificate diagnostics

openssl s_client -connect "${FQDN}:443" -servername "$FQDN" \
  -CAfile "$CERT_DIR/ca.crt" -verify_return_error </dev/null

openssl x509 -in "$CERT_DIR/server.crt" -noout \
  -subject -issuer -dates -fingerprint -sha256 -ext subjectAltName

openssl verify -CAfile "$CERT_DIR/ca.crt" -verify_hostname "$FQDN" \
  "$CERT_DIR/server.crt"

#Important log locations

#Backup before changes

At minimum, protect:

• MySQL database jansdb
• /etc/jans/
• /etc/certs/ excluding any CA private key that is stored offline
• /etc/apache2/sites-available/ and /etc/apache2/sites-enabled/
• /opt/jans/jans-setup/setup.properties.last
• /opt/jans/jans-setup/flex/auiConfiguration.json
• /opt/jre/lib/security/cacerts
• Admin UI policy store and licensing records

Example database backup:

sudo apt install -y age

sudo bash -Eeuo pipefail <<'BACKUP'
BACKUP_DIR=/var/backups/flex
BACKUP_RECIPIENT='age1REPLACE_WITH_OFFLINE_RECOVERY_PUBLIC_KEY'
STAMP="$(date -u +%Y%m%dT%H%M%SZ)"
PLAIN_ARCHIVE="${BACKUP_DIR}/.jansdb-${STAMP}.sql.gz"
ENCRYPTED_ARCHIVE="${BACKUP_DIR}/jansdb-${STAMP}.sql.gz.age"

install -d -m 700 "$BACKUP_DIR"
trap 'rm -f "$PLAIN_ARCHIVE"' EXIT

mysqldump --single-transaction --routines --triggers jansdb \
  | gzip -c >"$PLAIN_ARCHIVE"
gzip --test "$PLAIN_ARCHIVE"
age --recipient "$BACKUP_RECIPIENT" \
  --output "$ENCRYPTED_ARCHIVE" "$PLAIN_ARCHIVE"
chmod 600 "$ENCRYPTED_ARCHIVE"
BACKUP

Generate the age recovery key on a separate, protected administrator system with age-keygen; store the secret key in an offline secrets manager or encrypted recovery vault. Put only its age1... public recipient in the VM script. Never copy the recovery secret key to the production VM.

Before considering a backup complete or deleting an older known-good backup, transfer the encrypted archive to the isolated recovery environment and test both decryption and restoration into an empty test database:

age --decrypt --identity /secure/offline/flex-backup-key.txt \
  jansdb-YYYYMMDDTHHMMSSZ.sql.gz.age \
  | gzip --decompress --stdout \
  | mysql jansdb_restore_test

mysql --database=jansdb_restore_test --execute='SHOW TABLES;'

The pipefail option makes a failure in mysqldump, gzip, age, or the restore pipeline fail the operation. Keep encrypted backups outside the VM according to the applicable retention policy, and record each successful restore test without recording database contents or key material.

#Routine operations

Service health:

sudo systemctl is-active apache2 mysql jans-auth jans-config-api

Admin UI update:

sudo python3 /opt/jans/jans-setup/flex/flex-linux-setup/flex_setup.py --update-admin-ui

Before updating:

1. Read both Janssen and Flex release notes.
2. Confirm that the Flex and Janssen versions are compatible.
3. Back up the database, configuration, certificates, and Java trust store.
4. Test the update on a clone.
5. Re-run discovery, mTLS, token, userinfo, and Admin UI checks.

Certificate renewal checklist:

1. Issue a new leaf certificate with the same FQDN in SAN.
2. Keep the CA unchanged unless performing a planned CA rotation.
3. Validate the chain and hostname before installation.
4. Replace the Apache leaf and key atomically.
5. Run apache2ctl configtest and reload Apache.
6. If the issuing CA changed, import the new CA into Java and restart Jans services.
7. Never pin a renewable leaf certificate in Java's CA trust store.

#Uninstallation

Uninstallation is destructive and removes application data. Take and verify backups first.

Remove Flex components:

sudo python3 /opt/jans/jans-setup/flex/flex-linux-setup/flex_setup.py --remove-flex

Remove Janssen:

sudo python3 /opt/jans/jans-setup/install.py -uninstall

#Final acceptance checklist

After the complete installation, we recommend checking the following aspects to ensure smooth operation:

• :white_check_mark: Stable public IP and FQDN are correct.
• :white_check_mark: Host time is synchronized.
• :white_check_mark: Only 22, 80 when needed, and 443 are publicly reachable.
• :white_check_mark: MySQL, Jans Auth, and Config API listen only on protected interfaces.
• :white_check_mark: Server certificate validates for the FQDN and contains SAN.
• :white_check_mark: CA, server, and client certificate subjects are distinct.
• :white_check_mark: Client certificate contains the clientAuth EKU.
• :white_check_mark: Apache configuration test passes.
• :white_check_mark: Required services report active.
• :white_check_mark: Discovery contains issuer, authorization, token, userinfo, introspection, and JWKS endpoints.
• :white_check_mark: JWKS contains at least one key.
• :white_check_mark: Token and registration endpoints enforce mTLS as intended.
• :white_check_mark: Java trusts the issuing CA, not a renewable leaf.
• :white_check_mark: Admin UI loads, license/SSA is active, and the administrator can sign in.
• :white_check_mark: Backups are encrypted, stored off-host, and restoration has been tested.

#Reference documentation

• Install Gluu Flex on Ubuntu Linux
• Admin UI
• Flex releases
• Ubuntu Janssen installation
• mTLS configuration
• Janssen releases

Back to contents