Skip to content

Preparing VM for Gluu Server Installation#

Overview#

Thank you for your interest in the Gluu Server! This document will provide instructions for preparing your VM for a standard Gluu Server deployment. Once your servers are ready you can move on to the installation instructions. Good luck with your deployment, and welcome to the community!

Minimum Requirements#

The Gluu Server Community Edition (CE) needs to be deployed on a server or VM with the following minimum requirements.

CPU Unit RAM Disk Space Processor Type
2 4GB 40GB 64 Bit

Note

If you plan on installing more than the default components (i.e. oxAuth, oxTrust, and LDAP), we recommend that your server or VM have at least 8GB of RAM.

Warning

Please only post installation issues to Gluu Support if all the above requirements are met!

Ports#

The following ports are open to the Internet by default.

Port Number Protocol Notes
80 tcp Forwards to 443
443 tcp Apache HTTPD
22 tcp ssh

File Descriptors#

The Gluu Server requires setting the file descriptors to 65k. Follow these steps or research how to do this on your Linux platform.

  • Add the following lines in the /etc/security/limits.conf file.
* soft nofile 65536
* hard nofile 262144

  • Add the following lines to /etc/pam.d/login 

    session required pam_limits.so

  • Increase the file descriptor limit to 65535. The system file limit is set in /proc/sys/fs/file-max.

It is recommended to check the file descriptor size before increasing, and if the file descriptor size more than the default and customized, it is the recommended to the use the higher file size. File descriptor size can be found using the below command. 

# cat /proc/sys/fs/file-max

Please note command may vary depending on the OS flavor used.

echo 65535 > /proc/sys/fs/file-max**
* Use the ulimit command to set the file descriptor limit to the hard limit specified in /etc/security/limits.conf.

** ulimit -n unlimited**

!!!Note: Centos by default will not accept more than the default maximum of 65535. You may get an error while performing the above command.

  • Restart your system.

Amazon AWS#

Amazon AWS instances provide a public and private IP address. While running the /install/community-edition-setup/setup.py script, use the Private IP address. Also, use a hostname other then the long default hostname that Amazon provides. Update your DNS or hosts files accordingly.

Microsoft Azure#

Accessing the Gluu Server on Azure can be a little bit tricky because of the Public/Private IP. Azure assigns a new Public/Private IP addresses each time the server is started.

Setting up VM#

  1. Log into Windows Azure Administrative Panel

  2. Click on Virtual Machines tab, and click Create a Virtual Machine link

  3. From the menu, choose Compute > Virtual Machine > From Gallery branch.

  4. Choose Ubuntu Server 14.04 LTS or CentOS 6.7. Remember to set selinux to permissive if you choose CentOS.

  5. Provide a name for the VM in the Virtual Machine Name field and use Standard for Tier.

  6. Select a server with at least 4GB RAM in the Size dropdown menu.

  7. Provide a username/password to connect via ssh and upload ssh certificate. Click Next.

  8. Create a new cloud service and select None for the Availability Set option. * Endpoints Section: This is where port forwarding is set so that the internal IP address can be selectively reachable from the outside world. By default, only tcp /22 is there for ssh. The public ports for http and https (tcp ports 80 and 443) have to be added and mapped to the same private ports. If the cloud mappings are flagged conflicting, proceed without setting them. Remember to set them after the creation of the VM. Then, click Next.

  9. Choose not to install VM Agent and click the tick button to finalize the VM.

  10. Go to the Dashboard tab of VM Management Panel and copy the DNS Name. This is the name that is used to access the Gluu Server.

  11. You should now be able to ssh to the server and proceed with the installation.

Linode VM#

Linode Virtual Machines (VM) use a custom kernel which is not supported by the Gluu Server, therefore the kernel must be updated before the Gluu Server can be installed in a Linode VM. The following steps will guide you through kernel update in the Linode VM.

  • Check for the current version of the kernel. If the output contains -Linode, then proceed 

    # uname -a

  • Run the following command to update the kernel: 

    # apt-get install linux-image-virtual grub2

  • Modify grub file in the /etc/default/ folder: 

    # vim /etc/default/grub

  • Ensure that the following lines are present in the grub file 

    GRUB_TIMEOUT=10
GRUB_CMDLINE_LINUX="console=ttyS0,19200n8"
GRUB_DISABLE_LINUX_UUID=true
GRUB_SERIAL_COMMAND="serial --speed=19200 --unit=0 --word=8 --parity=no --stop=1"

  • Finally run the following commands to update grub and reboot: 

    # update-grub
# reboot