SCIM new features

New features and enhancements#

SCIM server implementation was updated for version 3.1.3 in order to adhere more closely to SCIM standard and include features we had been missing. The following summarizes the most important enhancements:

Stricter validations#

Validations applied upon input data are more demanding now. We have added and fine-tuned checks to verify that data which is supposed to represent things like countries, languages, locales, timezones, e-mails, URLs, dates, etc. are syntactically valid and follow the standard recommendations.

Also we have added business logic to correctly apply the processing rules when it comes to handling read-only and immutable attributes.

Improved searching behaviour#

We have added searching capabilities so that it's possible to make general searches now, that is, you can have in your search results a mix of different resource types (Users, groups, etc.).

Sorting is not an experimental feature anymore: developers can retrieve results sorted by most of SCIM resource attributes.

The processing of filter expressions used in searches adheres more closely to spec and now it generates more accurate LDAP expressions to run. Not only you can use filters with string attributes but also any mix of boolean, date, and integer typed attributes.

Additionally if errors are found when parsing expressions, the descriptions returned are helpful to spot where the problem is.

Safer modifications of resources via PATCHes#

After studying how resource updates work according to the spec, it's easy to notice that PUT may lead to surprising results. Despite our PUT implementation is "relaxed" in a way that it's difficult to get into problematic scenarios, we have added PATCH support which enables developers to be concise about the changes they want to apply on SCIM resources. Now it's possible to define with precision what will be updated, removed, or added from a resource all in a single operation.

To learn more about PATCH see section 3.5.2 of RFC 7644. For users of SCIM-Client there is a bunch of test cases as well.

More precise error messages#

When an anomaly is presented as a result of processing a service request (e.g. a malformed input, attribute mutability conflicts, non-existing resources, etc.), the trace of messages appearing in the log is more expressive so it's easier to be on the errors trail. The error responses returned by the server are accurate about the cause of errors so ideally instead of checking logs, developers just need to inspect the contents of the reponse.

To learn more about how error handling is standardized in SCIM, please read section 3.12 of RFC 7644.

This section explains how to do error handling for SCIM-Client users.

New chances for post-processing#

Formerly, developers might execute custom code via Python interception scripts just before changes were being saved to LDAP whether for creation, update, or removal of users and groups. Now, in addition to pre-persistence events, there is also room for post-persistence processing. This way developers can trigger execution of custom code that is applicable only after changes are actually saved.

Server output is compliant#

We have striven after standard compliance and fixed subtle mistakes and deviations from the spec that were detected in serialization routines.

Better javadocs#

Java users can benefit from comprehensive api docs in maven projects such as scim-client2 and oxtrust-scim.

Important updates for developers#

Behavior changes#

In previous implementations we detected a few practices that did not stick appropriately to the standard. Now they are fixed but you may need to adjust your applications or workflows accordingly.

No group assignments at /Users endpoint#

According to spec (see section 4.1.2 of RFC 7643) the multi-valued attribute "groups" in User resource "... has a mutability of readOnly, and group membership changes MUST be applied via the Group Resource". Mistakenly, our previous implementations allowed developers to do group assignments via POST or PUT in the /Users endpoint.

Please adjust your code so that memberships are only manipulated via /Groups . This is done by passing a list for the Group's attribute called "members". It suffices to supply the "value" subattribute for every member: it will contain the "id" of the User you are trying to assign.

The implementation takes care of updating group and user entries in LDAP accordingly and consistently after every modification. You can use PUT to replace (overwrite) all members of a Group at once, or PATCH to add or remove specific users to the existing members list.

Adjustments in how attributes are returned#

Two aspects have changed with regards to multi-valued attributes:

The subattribute called operation was removed because it is simply not part of the specification. You will not be able to set its value or retrieve it now (even if it was stored in LDAP in the past)
When a multi-valued attribute is empty, it is not returned in the response. Previously, any operation (create, retrieve, update, etc...) that returned a resource was showing an empty json list [] for multi-valued attributes that had no data assigned (e.g. a user with no addresses). Update your code to account for the fact that the attribute will not be there when it has no info.

For single-valued attributes that are not assigned (no data), the same rule applies. The previous implementation returned the attribute with null value in the Json response, like this:

{
...
   "language" : null,
...
}

In current version, the attribute/value pair is not present.

Bulks not returning resource contents#

As section 3.7 of RFC 7644 mentions, when a bulk operation is successful the server may elect to omit the response body. We have chosen to do so in contrast to previous implementation that included the complete resource contents back to the client. This allows us to reduce the overhead of Bulk operations.

When the status of an operation is not in the 200-series response, the body of the error is actually included.

No LDAP attribute names for filter/sort clauses#

A not very elegant practice sometimes used by developers acquainted with Gluu LDAP schema was employing LDAP attribute names to issue searches. As an example the following would convey searching for a match with a particular creation date:

{
  "schemas": ["urn:ietf:params:scim:api:messages:2.0:SearchRequest"]
  "filter": "oxCreationTimestamp eq \""2011-05-13T04:42:34Z"\"",
  ...
}

The correct way to issue a query is by employing SCIM schema attributes only. A working translation of the previous example would be:

{
  "schemas": ["urn:ietf:params:scim:api:messages:2.0:SearchRequest"]
  "filter": "meta.created eq \""2011-05-13T04:42:34Z"\"",
  ...
}

To know the "right" names available to use, just inspect the server schema (/Schemas) endpoint, or take a look at RFC 7643, and locate your resource of interest (User, FidoDevice, etc.).

The analog applies when sortBy attributes are specified.

Pairwise identifiers#

Handling of public pairwise identifiers (PPIDs) changed slightly. This multivalued attribute is modeled as one with returnability "request", meaning that to make it part of responses in searches or queries, developers need to explicitly request it, in other words, supply it in the attributes query param. Take into account that using LDAP attribute name oxPPID will not work. See the immediately previous section.

This special attribute cannot be modified (its mutability being "readOnly"), however it can be removed. For this particular operation developers have to use PATCH.

For examples on pairwise identifiers usage, you may like to check this Java test case.

About SCIM-Client#

As previously mentioned, current SCIM server implementation is revamped with new features. This is also the case for the Java-based "SCIM-Client" project. The following highlights the most prominent changes and improvements:

Client now mirrors more closely the SCIM protocol: We have adjusted the (client) API used to interact with the service: Java methods that developers must call to send requests to the service are now quite similar to the operations the SCIM standard itself contains. This is a big advantage: developers familiar with the SCIM spec can start working immediately, while those who are not can start learning about SCIM protocol and schema as they are coding.
More Jsonized: Complementary to the previous aspect, we have grown the number of examples (test cases) that use Json payloads. By glancing through a json file (not written in a single-line .properties file) developers can get the grasp of what's happenning in test cases more easily, and at the same time are learning about how requests are physically structured. In other words, getting acquainted with the SCIM spec.
A simplified and type-safe approach to manipulate custom attributes. Now it's easier to supply the values of attributes associated to the User extension. To retrieve values, convenience methods are available so there is no need to do casting or call data type constructors manually.
Inclusion of a logging framework: We have added Log4j2 support for a more comfortable debugging experience. In previous versions, the out.println approach was used.
A thorough migration to RestEasy 3: For version 3.1.0 of SCIM-Client, the project upgraded from RestEasy 2 to RestEasy 3. However, some deprecated APIs and 2.0 techniques still remained in the code. For current version we have introduced changes following the recommended 3.0 practices to stay current. This way the upcoming version of the client (that we aim to support RestEasy 3.1) will also have a smoother migration process. For more information on migration from RestEasy 2 to 3, see chapter 1 of the "Upgrading from Resteasy 2 to Resteasy 3 guide". As a byproduct of this update, developers can now add custom error handling capabilities to their applications, a feature that had been missing for long.
Requires Java SE 8.

These enhancements may come at a cost for you. We will analyze the implications of this in the following section.

Is my existing code affected by new features?#

If you have been using SCIM-Client in your projects, and want to take advantage of the new features found in server as well as in client implementation we suggest to refactor your code so that it uses the new scim-client2 maven artifact. With it you can:

Modify resources via PATCH (a convenient feature that had been missing for long)
Execute general searches, that is, searches not focused on a single type of resource (e.g. only Users)
Supply the excludedAttributes query param (whether in creation, modification or retrieval operations)
Inspecting the raw responses coming from the server
Do custom error handling
Release resources when no more requests will be issued

If you definitely do not want to alter your existing code base you can still use the old style scim-client artifact and work as you used to (a few special cases apply).

In summary, version 3.1.3 of the project includes two modules:

scim-client: Equivalent to 3.1.2 (a few test cases were updated to conform to newer service implementation)
scim-client2: The newer client. For 3.2 onwards, this will be the only module delivered in this project. This version has more complete java-docs.

Choose one of the following pom fragments for your projects:

<!-- new -->
<dependency>
  <groupId>gluu.scim.client</groupId>
  <artifactId>scim-client2</artifactId>
  <version>3.1.3.Final</version>
</dependency>

<!-- deprecated -->
<dependency>
  <groupId>gluu.scim.client</groupId>
  <artifactId>scim-client</artifactId>
  <version>3.1.3.Final</version>
</dependency>

How to migrate my current code to use the newer SCIM-Client API?#

There are four major aspects this shift entails:

Changes in method signatures#

The Java interface gluu.scim2.client.ScimClient does not exist anylonger and has been replaced by gluu.scim2.client.rest.ClientSideService. This newer interface is basically the same interface used as contract for the web service implementation. In other words, the client and server side are using the same contract. Methods in the new interface are quite similar to those in the older, however,

A few method names have changed to follow a consistent naming convention,
Most methods are written in two versions: one that receives a Java object and another that expects a (Json) String,
Almost all signatures contain additional parameters (for example to support excludedAttributes feature), and additionally,
Methods do not have any throw clauses.

The object you used to obtain when calling gluu.scim2.client.factory.ScimClientFactory#getClient or gluu.scim2.client.factory.ScimClientFactory#getTestClient belonged to the interface ScimClient. Now it can belong to ClientSideService or a more restrictive (smaller) interface if you wish (see gluu.scim2.client.BaseTest#setupClient and gluu.scim2.client.factory.ScimClientFactory to learn more).

Changes for reading responses#

As mentioned above, we upgraded to newer RestEasy 3.0 practices for building clients. We replaced the Resteasy client framework in resteasy-jaxrs by the JAX-RS 2.0 compliant resteasy-client module. The project now uses the JAX-RS 2.0 Client API in conjuction with the Resteasy Proxy Framework (see jboss doc page) and we share an interface between client and server. We have already touched upon this point: the client proxy now resembles more closely the service contract (we reuse the same service interface instead of defining a new one as in the older client).

The most important implication regarding RestEasy changes is that org.jboss.resteasy.client.core.BaseClientResponse<T> is no longer used and instead javax.ws.rs.core.Response comes into play. So you will have no more something like:

BaseClientResponse<User> response = client.createUser(...);

but will have to use

Response response2 = client2.createUser(...);

Note that Response, unlike the deprecated ClientResponse<T> (superclass of BaseClientResponse<T>), is not a generic type, so it is necessary to give a type when extracting a response entity. Thus, you should turn the following:

user = response.getEntity();

into

user = response2.readEntity(UserResource.class);

getEntity method is also part of Response but it plays a different role (read the API docs of RestEasy). It is necessary to call readEntity to extract the response entity under most circumstances.

For convenience, SCIM-Client automatically buffers the response data for any call made to a service method. In other words, the underlying input stream is totally consumed and closed. This has a nice couple of advantages:

You don't have to worry about using the close method of Response - even if there is no usage of readEntity in your code. This may happen when you are only interested in the status code of a response.
You may call readEntity any number of times for the same Response object - something that will usually lead to exceptions using a standard approach. This way, you can make with no problem something like:
```
logger.info("Raw response received was {}", response2.readEntity(String.class);
user = response2.readEntity(UserResource.class);
```

Note that now we are allowed to "see" the response received from the server - something not achievable with the previous SCIM-Client version.

Data model changes#

The package org.gluu.oxtrust.model.scim2 has been refactored to be better structured. As usual this package resides in the oxtrust-scim maven module of oxTrust project. It has the main classes to represent the attributes and subattributes of SCIM resources (user, group and fido device), as well as other supporting classes. Despite oxtrust-scim lies in the "server side" project, it plays a key role for the client side.

The new SCIM server implementation brought a few changes:

A new subpackage user was created to hold all POJOs used to represent the attributes and sub-attributes (in SCIM spec jargon) for the user resource
A new subpackage group was created to hold all POJOs related to the group resource
A new subpackage bulk was created to hold classes used to describe bulk operations
A few class names have changed. The most impacting ones are listed in the migration guide

Handling custom attributes#

To specify custom attributes in previous versions, developers used to pass an instance of Extension when calling method addExtension of User object. The usage of Extension class has been limited for metadata purposes only and now the way to represent a set of custom attributes is via the CustomAttributes class.

The superclass for all SCIM resources, namely org.gluu.oxtrust.model.scim2.BaseScimResource, has methods addCustomAttributes and getCustomAttributes for setting and reading respectively, the custom attributes values.

With CustomAttributes now is possible to specify values of type Boolean, DateTime, and Integer in addition to previously supported String, BigDecimal, Date, and List. Retrieving custom attribute values is not restricted to calling a getValue method returning a String anymore. Now it's possible to provide a return type parameter in order to receive instances of the desired type directly avoiding manual conversion to target types. The same goes for multi-valued attributes (the type of collection elements is parameterized as well).

Having addCustomAttributes and getCustomAttributes not directly tied to the User resource enables the possibility to offer extensions for any kind of resource in future implementations of SCIM service.

A small migration guide#

The following will serve as a guide so you can quickly refactor your existing code. The use of an IDE is highly recommended:

Data model#

Class in 3.1.2	In package	New class	In package
User	org.gluu.oxtrust.model.scim2	UserResource	org.gluu.oxtrust.model.scim2.user
Group	org.gluu.oxtrust.model.scim2	GroupResource	org.gluu.oxtrust.model.scim2.group
FidoDevice	org.gluu.oxtrust.model.scim2.fido	FidoDeviceResource	org.gluu.oxtrust.model.scim2.fido
ResourceType	org.gluu.oxtrust.model.scim2.provider	ResourceType	org.gluu.oxtrust.model.scim2.provider
SchemaType	org.gluu.oxtrust.model.scim2.schema	SchemaResource	org.gluu.oxtrust.model.scim2.schema
Resource	org.gluu.oxtrust.model.scim2	BaseScimResource	org.gluu.oxtrust.model.scim2

Notes:

The user supporting classes Name, Address, Email, Entitlement, PhoneNumber, Photo, Role, and X509Certificate have been moved to package org.gluu.oxtrust.model.scim2.user.

Service methods#

Recall that ClientSideService conglomerates all methods defined in the following interfaces:

gluu.scim2.client.rest.ClientSideUserService
gluu.scim2.client.rest.ClientSideGroupService
gluu.scim2.client.rest.ClientSideFidoDeviceService
org.gluu.oxtrust.ws.rs.scim2.IUserWebService
org.gluu.oxtrust.ws.rs.scim2.IGroupWebService
org.gluu.oxtrust.ws.rs.scim2.IFidoDeviceWebService

Users manipulation#

The following table lists user methods found in the previous client that are not present in the current one but that still have an alternative to achieve the same functionalities.

Method in ScimClient	Replace with method	Defined at interface
createPerson	createUser	IUserWebService
createPersonString	createUser	IUserWebService
retrievePerson	getUserById	IUserWebService
retrieveUser	getUserById	IUserWebService
updatePerson	updateUser	IUserWebService
updatePersonString	updateUser	IUserWebService
deletePerson	deleteUser	IUserWebService

Removed methods#

retrieveAllUsers is not available in new client. Providing a method that returns all users is discouraged since there is no way to force callers to provide parameters that restrict the amount of data returned apart from the maxResults inherent to service behavior (see section 5 of RFC 7643).

If you still need to return a list of all users in LDAP you can:

Execute a search (use searchUsersPost or searchUsers)
Pass an empty (or null) filter
Pass null for count
Provide a suitable value for the attrsList parameter. This the same well-known attributes query param the spec refers to. This way you can reduce the amount of attributes retrieved per user.

For examples, see the following test cases: * QueryParamCreateUpdateTest * QueryParamRetrievalTest * ComplexSearchUserTest

Extended attributes#

Custom attributes manipulation has been simplified: now they are handled via CustomAttributes class (check the api docs of org.gluu.oxtrust.model.scim2.CustomAttributes). Visit this page to learn more about this topic.

Groups manipulation#

The following table lists group methods found in the previous client that are not present in the current one but that still have an alternative to achieve the same functionalities.

Method in ScimClient	Replace with method	Defined at interface
createGroupString	createGroup	IGroupWebService
retrieveGroup	getGroupById	IGroupWebService
updateGroupString	updateGroup	IGroupWebService

Removed methods#

retrieveAllGroups is not available in new client. Use a similar strategy to that of finding all users. Use searchGroups or searchGroupsPost for the task.

New methods#

patchGroup allows you to apply a PATCH operation upon a group.

Fido devices manipulation#

The following table lists fido devices methods found in the previous client that are not present in the current one but that still have an alternative to achieve the same functionalities.

Method in ScimClient	Replace with method	Defined at interface
searchFidoDevices	searchDevices	IFidoDeviceWebService
searchFidoDevicesPost	searchDevicesPost	IFidoDeviceWebService
retrieveFidoDevice	getDeviceById	IFidoDeviceWebService
updateFidoDevice	updateDevice	IFidoDeviceWebService
deleteFidoDevice	deleteDevice	IFidoDeviceWebService

Metadata#

Method in ScimClient	Replace with method	Defined at interface
retrieveServiceProviderConfig	getServiceProviderConfig	ClientSideService
retrieveResourceTypes	getResourceTypes	ClientSideService

Removed methods#

getUserExtensionSchema is not available in new client. Use the new getSchemas method of ClientSideService to obtain this information.

New methods#

getSchemas allows to issue a GET request to the /Schemas endpoint to retrieve all the information of supported schemas in the server implementation.

Miscelaneous#

New method searchResourcesPost allows to search all resource types at once (by using POST on /.search endpoint).
New method close allows to free resources allocated by the underlying RestEasy client employed to perform the networking operations. Once you call this method, you must not issue any request - you will have to obtain a new client instance from gluu.scim2.client.factory.ScimClientFactory

Are there any special cases to account if still using older client?#

Yes. The following are the limitations you should account for:

When using searchUsersPost, searchGroupsPost, and searchFidoDevicesPost methods, the attributesArray param is ignored.
For BulkOperations, responses cannot be read, more exactly, calling getOperations on class BulkResponse will always return an empty list. This is due to a problem in deserialization of bulk responses for versions <= 3.1.2.

How do I add custom error handling?#

This page shows examples on how to process a failed operation received from your service.

SCIM new features

New features and enhancements#

Stricter validations#

Improved searching behaviour#

Safer modifications of resources via PATCHes#

More control on responses content#

More precise error messages#

New chances for post-processing#

Server output is compliant#

Better javadocs#

Important updates for developers#

Behavior changes#

No group assignments at /Users endpoint#

Adjustments in how attributes are returned#

Bulks not returning resource contents#

No LDAP attribute names for filter/sort clauses#

Pairwise identifiers#

About SCIM-Client#

Is my existing code affected by new features?#

How to migrate my current code to use the newer SCIM-Client API?#

Changes in method signatures#

Changes for reading responses#

Data model changes#

Handling custom attributes#

A small migration guide#

Data model#

Service methods#

Users manipulation#

Removed methods#

Extended attributes#

Groups manipulation#

Removed methods#

New methods#

Fido devices manipulation#

Metadata#

Removed methods#

New methods#

Miscelaneous#

Are there any special cases to account if still using older client?#

How do I add custom error handling?#